ECAT-2024 EtherCAT SubDevice I/O Module, Isolated 4-ch 12-bit Analog Output
EtherCAT SubDevice module with four isolated 12-bit analogue outputs, ranges from ±5 V to 0 ~ +10 V. Two RJ-45 ports allow daisy-chain wiring in star, line or ring topologies.
- EtherCAT SubDevice with on-the-fly processing and an MCU that handles network traffic
- Four isolated 12-bit analogue output channels with ±5 V, ±10 V, 0 ~ +5 V and 0 ~ +10 V ranges
- Two RJ-45 bus ports supporting daisy-chain connection and star, line or ring topologies
- Up to 100 m between stations (100BASE-TX), 1 ms cycle time and distributed clocks
- EtherCAT conformance test tool verified
- ±4 kV contact ESD protection on each channel, with EFT and surge protection to IEC 61000-4-4 and 61000-4-5
223,00 € per piece
| 1–9 pcs | 223,00 € | |
|---|---|---|
| 10–30 pcs | 217,00 € | −3 % |
| 31+ pcs | 212,00 € | −5 % |
Informações de produto "ECAT-2024 EtherCAT SubDevice I/O Module, Isolated 4-ch 12-bit Analog Output"
The ECAT-2024 CR is an EtherCAT SubDevice that drives four isolated 12-bit analogue output channels from an EtherCAT Main Device or configurator. Output status is returned in the process data, so the channel state can be monitored in the same cycle as the control values.
Two RJ-45 bus ports support daisy-chain connection, which simplifies device installation and cabling. Stations can be up to 100 m apart over 100BASE-TX, with a 1 ms cycle time and distributed clocks. An on-board MCU handles network traffic and on-the-fly processing.
Each channel is rated for ±4 kV contact ESD, and the module meets IEC 61000-4-4 EFT, IEC 61000-4-2 ESD and IEC 61000-4-5 surge levels. A removable terminal block, LED I/O status indicators and a DIN-rail mounting plastic housing suit panel builds that run from -25 ~ +75 °C.
Applications
- Semiconductor Tools
- Metal Forming
- Packaging
- Injection Molding
- Assembly Systems
- Printing Machines
- Robotics
| Product type: | Analog output module |
|---|---|
| Interface: | 2 x RJ-45 |
| Protocol: | EtherCAT |
| Ports: | 2 |
| Isolation: | Isolated |
| Power input: | +10 VDC ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Signal: ±1 kV Class A; Power: ±1 kV Class A |
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Channel |
| Surge (IEC 61000-4-5) | ± 1 kV Class A |
| Analog Output | |
| Channels | 4 |
| Range | ±5 V, ±10 V, 0 ~ +5 V, 0 ~ +10 V |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Span Drift | ±5 ppm/°C |
| EtherCAT | |
| Ports | 2 x RJ-45 |
| Distance Between Stations | 100 m Max. (100Base-TX) |
| Data Transfer Medium | Ethernet/EtherCAT cable (Min. CAT5), shielded |
| Cycle Time | 1 ms |
| Distributed Clocks | Yes |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 4 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 108 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sessão