CAN-2017C CANopen Slave Analog Input Module, 8-ch AI
CANopen slave module with eight differential analog inputs, 16-bit resolution and CiA DS-301 v4.02 / DSP-401 v2.1 support, for DIN-rail mounting on a CAN bus.
- NMT slave with Node Guarding and Heartbeat error control
- Default EDS file supplied and validated with the CiA CANopen Conformance Test tool
- 8 differential analog inputs with 16-bit resolution and ±0.1% FSR accuracy
- Selectable ranges including -20 mA ~ +20 mA with optional external 125 Ω resistor
- 10 RxPDO and 10 TxPDO with Dynamic PDO support
- Supports CiA DS-301 v4.02 and DSP-401 v2.1, baud rates 10 k to 1 M
302,00 € per piece
| 1–9 pcs | 302,00 € | |
|---|---|---|
| 10–30 pcs | 293,00 € | −3 % |
| 31+ pcs | 287,00 € | −5 % |
Informações de produto "CAN-2017C CANopen Slave Analog Input Module, 8-ch AI"
The CAN-2017C CR is a CANopen slave module that brings eight differential analog inputs onto a CANopen network. It suits engineers who need to read sensor signals over CAN bus using the standard CANopen protocol, with input status and channel settings accessed through conventional CANopen objects rather than custom code.
Each channel offers 16-bit resolution and a choice of input ranges from ±10 V down to ±150 mV, plus -20 mA to +20 mA when an optional external 125 Ω resistor is fitted. Channels can be configured individually, and the module supports Dynamic PDO alongside event-triggered, remotely requested, cyclic and acyclic SYNC transmission modes.
The module has passed validation with the CiA CANopen Conformance Test tool and includes a default EDS file. It operates from +10 to +30 VDC, provides 3000 VDC isolation and is designed for DIN-rail installation across an operating range of -25 to +75 °C. The CR ordering code is the RoHS version of the module.
Applications
- Industrial machine control
- Factory automation
- Vehicle control systems
- Medical equipment control
- Remote data acquisition
- Environmental monitoring
- Packaging machine control
| Product type: | Analog Input Module |
|---|---|
| Interface: | CAN bus |
| Protocol: | CANopen |
| Analog inputs: | 8 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Hardware watchdog |
| LED Indicators | |
| Status | 3 LEDs to PWR, RUN and ERR |
| Analog Input | |
| Channels | 8 |
| Sensor Type | ±10V, ±5V, ±1V, ±500mV, ±150mV, -20mA ~ +20mA (Requires Optional External 125 Ω Resistor) |
| Resolution | 16-bit |
| Accuracy | +/-0.1% FSR |
| Sampling Rate | 10 Samples/Sec. (Total) |
| Input Impedance | >2 MΩ |
| Common Mode Rejection | 86 dB |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 240 Vrms |
| Individual Channel Configuration | Yes |
| Zero Drift | +/- 10 μV/ °C |
| Span Drift | +/- 25 ppm/ °C |
| Isolation | 3000 VDC |
| CANopen | |
| Baud Rate | 10 k ~ 1 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Built-in 120Ω |
| Protocol | CiA 301 v4.02, CiA 401 v2.1 |
| Node ID | 1 ~ 99 |
| No. of PDOs | 10 RxPDO , 10 TxPDO |
| PDO Mode | Event Triggered, Remotely requested, Cyclic and acyclic SYNC |
| Error Control | Node Guarding protocol / Heartbeat Producer |
| NMT | Slave |
| EMCY Message | Yes |
| Power | |
| Consumption | 2.0 W |
| Mechanical | |
| Dimensions (mm) | 33 x 99 x 78 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sessão