tET-A4 Tiny Ethernet I/O Module, 4-ch Digital Output (PNP Source)
Compact Ethernet I/O module with four PNP (source) open-collector digital outputs, controlled over a 10/100 Base-Tx RJ-45 port using Modbus TCP/UDP or MQTT.
- Four PNP (source) open-collector digital outputs, 650 mA per channel
- Load voltage +10 to +40 VDC with +48 VDC overvoltage protection and short-circuit protection
- Modbus TCP/UDP and MQTT protocol support over a single 10/100 Base-Tx RJ-45 port
- Dual-watchdog function with CPU and host watchdogs, plus a predefined safe value for outputs
- DO power-on value and safe value settings
- I/O pair connection (push and pull) for DI-to-DO control over Ethernet
104,00 € per piece
| 1–9 pcs | 104,00 € | |
|---|---|---|
| 10–30 pcs | 101,00 € | −3 % |
| 31+ pcs | 99,00 € | −5 % |
Informacje dot. produktu "tET-A4 Tiny Ethernet I/O Module, 4-ch Digital Output (PNP Source)"
The tET-A4 CR is a compact Ethernet I/O module with four digital outputs, configured as PNP (source) open-collector channels. It lets an engineer switch remote loads from a Modbus TCP, Modbus UDP or MQTT host over a 10/100 Base-Tx network, which suits PLC, HMI and SCADA integration.
Its small footprint allows it to be fitted on a DIN rail or embedded directly within a machine. The module is supplied with a web server for configuration, and it can be updated with new firmware over Ethernet. Each output has a power-on value and a safe value, and the module provides both a CPU watchdog and a host watchdog to protect the outputs if the controller fails.
Key points for specification:
- Four PNP (source) open-collector outputs rated at 650 mA per channel, with a load voltage of +10 to +40 VDC
- Operates from +12 to +48 VDC supplied through a removable terminal block
- Photo-isolated outputs with 3750 Vrms isolation
Applications
- Factory automation
- Building automation
- Home automation
- Remote maintenance
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | 10/100 Base-TX), Ethernet (RJ-45 |
| Protocol: | Modbus TCP |
| Digital outputs: | 4 |
| Ports: | 1 |
| Isolation: | 3750 Vrms |
| Power input: | +12 to +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit MCU |
| Watchdog Timer | Module, Communication (Programmable) |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet |
| Digital Output | |
| Channels | 4 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Source |
| Load Voltage | +10 to +40 VDC |
| Load Current | 650 mA/channel |
| Overvoltage Protection | +48 VDC |
| Short-circuit Protection | Yes |
| Isolation | 3750 Vrms |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-Tx |
| Access Control | Password and IP Filter |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 1.0 W |
| Powered from Terminal Block | +12 to +48 VDC |
| Mechanical | |
| Dimensions (mm) | 52 x 95 x 27 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 to 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Zaloguj się