WISE-7160 Intelligent PoE I/O Module, 6-ch DI and 6-ch Power Relay
WISE-7160 CR is a PoE intelligent I/O module with 6 isolated wet-contact digital inputs and 6 power relay outputs, programmed in a browser using IF-THEN-ELSE rules and Modbus TCP.
- Browser-based configuration of IF-THEN-ELSE control logic, with no extra software tool or programming required
- 6 isolated wet-contact digital inputs, each supporting counter input
- 6 power relay outputs, Form A (SPST N.O.), rated 5 A @ 250 VAC/24 VDC (resistive load)
- Modbus TCP protocol for SCADA system integration
- Timer (12 sets), internal register (48 sets), recipe (12 sets) and advanced P2P (8 sets) functions
- IEEE 802.3af Class 1 PoE, or 12 ~ 48 VDC terminal block power input
210,00 € per piece
| 1–9 pcs | 210,00 € | |
|---|---|---|
| 10–30 pcs | 203,00 € | −3 % |
| 31+ pcs | 199,00 € | −5 % |
Informacje dot. produktu "WISE-7160 Intelligent PoE I/O Module, 6-ch DI and 6-ch Power Relay"
The WISE-7160 CR is a standalone I/O controller for remote logic control and monitoring. Its built-in web interface lets you configure IF-THEN-ELSE control rules from a browser, so no separate software tool or programming is needed. It combines six wet-contact digital inputs, each with counter capability, and six Form A power relay outputs in one module.
Power can come from an IEEE 802.3af Class 1 PoE network over a standard Category 5 Ethernet cable, or from a 12 ~ 48 VDC terminal block supply where PoE is not available. Timer, internal register, recipe and advanced peer-to-peer functions extend the control logic, and Modbus TCP allows integration with SCADA systems.
The module suits building and factory automation, machine automation and remote maintenance or diagnosis work where a compact, networked I/O point is needed. Its 2500 VDC intra-module isolation and -25 ~ +75 °C operating range support demanding installations.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | I/O module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 6 |
| Relay outputs: | 6 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | PoE, 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Digital Input/Counter | |
| Channels | 6 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +10 VDC ~ +50 VDC |
| OFF Voltage Level | +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 kΩ |
| Overvoltage Protection | +70 VDC |
| Relay Output | |
| Channels | 6 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 5 A @ 250 VAC/24 VDC (Resistive Load) |
| Operate Time | 10 ms (max.) |
| Release Time | 5 ms (max.) |
| Electrical Endurance | 100,000ops. |
| Mechanical Endurance | 20,000,000 ops. |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 2.8 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Zaloguj się