PPDS-762D-MTCP Serial-to-Ethernet Device Server, 6 Serial Ports, PoE
Programmable serial-to-Ethernet device server with five RS-232 ports, one RS-485 port, PoE, one digital input, two digital outputs and a Modbus TCP to RTU/ASCII gateway function.
- Five RS-232 ports and one RS-485 port (6 serial ports in total) bridged to Ethernet
- Modbus TCP to RTU/ASCII gateway function for SCADA and HMI integration
- VxComm driver creates virtual COM ports on Windows 7 SP1, 10, 2012 and 2016 (32/64-bit)
- Programmable Xserver structure with MiniOS7 firmware
- PoE (IEEE 802.3af, Class 1) or 12 to 48 VDC terminal block power
- One digital input with latched and counter functions and two open-collector digital outputs
382,00 € per piece
| 1–9 pcs | 382,00 € | |
|---|---|---|
| 10–30 pcs | 370,00 € | −3 % |
| 31+ pcs | 363,00 € | −5 % |
Informacje dot. produktu "PPDS-762D-MTCP Serial-to-Ethernet Device Server, 6 Serial Ports, PoE"
PPDS-762D-MTCP brings legacy serial equipment onto an Ethernet network. Its five RS-232 ports and one RS-485 port can be bridged to a LAN, and the VxComm driver lets a Windows PC treat the remote serial ports as local COM ports, so existing serial software can keep working without modification.
The unit is programmable through the Xserver structure and runs the built-in MiniOS7 firmware, which handles protocol conversion and gateway tasks. It can act as a Modbus TCP to RTU/ASCII gateway for SCADA and HMI systems that speak Modbus TCP. Power can come from a PoE source using IEEE 802.3af Class 1, or from a 12 to 48 VDC supply on the removable terminal block.
Local I/O includes one digital input with latched and counter functions, and two open-collector sink (NPN) outputs rated at 30 VDC and 100 mA maximum. The unit is housed in a plastic case, mounts on DIN-rail or wall, and is specified for operation from -25 to +75 °C. This ordering code includes the CA-0910 cable.
Applications
- Factory automation
- Building automation
- Home automation
| Product type: | Serial-to-Ethernet device server |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | Modbus TCP |
| Digital inputs: | 1 |
| Digital outputs: | 2 |
| Ports: | 6 serial, 1 Ethernet |
| PoE: | IEEE 802.3af, Class 1 |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| EEPROM | 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles. |
| Flash | 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power/PoE 5 x digit 7 Segment |
| Digital Input | |
| Channels | 1 |
| Type | Dry Contact |
| Sink/Source (NPN/PNP) | Source, Common Ground |
| ON Voltage Level | +3.5 ~ +30 V |
| OFF Voltage Level | +1 V max. |
| Digital Output | |
| Channels | 2 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink (NPN) |
| Load Voltage | 30 VDC, max. |
| Load Current | 100 mA, max. |
| Ethernet | |
| Ports | 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) |
| COM Ports | |
| Ports | 4 x 3-wire RS-232 1 x 5-wire RS-232 1 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1/COM2. |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM6 |
| Stop Bit | 1, 2: for COM1 ~ COM6 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 2.9 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 mm x 35 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Zaloguj się