PCIe-PS400 PCI Express 4-Axis Motion Control Card
A 4-axis stepping and pulse-type servo motor control card for PCI Express IPCs, with interpolation, T/S-curve acceleration and 32-bit encoder counting on each axis.
- Independent 4-axis motion control with a pulse output rate of up to 4 MHz per axis
- Pulse output modes CW/CCW or PULSE/DIR
- 32-bit encoder counter per axis with A/B phase or Up/Down inputs
- 2/3-axis linear and 2-axis circular interpolation, plus continuous interpolation
- Programmable T/S-curve acceleration and deceleration
- Programmable automatic homing and software limits
755,00 € per piece
| 1–9 pcs | 755,00 € | |
|---|---|---|
| 10–30 pcs | 732,00 € | −3 % |
| 31+ pcs | 717,00 € | −5 % |
Informacje dot. produktu "PCIe-PS400 PCI Express 4-Axis Motion Control Card"
The PCIe-PS400 CR is a 4-axis stepping and pulse-type servo motor control card for industrial PCs with a PCI Express bus. It suits general-purpose motion control, with a maximum pulse output rate of 4 MHz on each axis and CW/CCW or PULSE/DIR output modes.
Most motion functions, including linear and circular interpolation, T/S-curve acceleration and deceleration, synchronous actions and automatic homing, run on a dedicated motion ASIC, which keeps processor load low. Motion status and other I/O cards in the same IPC can still be monitored while the motors are driven, and one or more cards can be used in a single IPC.
Software support includes the EzGo Utility and an SDK for LabVIEW 5.0 to 8.x, with OS support for Windows 7/10 (32/64-bit) and Windows XP/2000 (32-bit). The card uses a 68-pin SCSI-II connector and a rated consumption of +12 V at 200 mA and +3.3 V at 500 mA.
Applications
- Semiconductor Manufacturing
- Component Inspection
- Manufacturing Quality Control
- Food and Beverage Inspection
- Microscopy and Medical Imaging
- Biometrics Applications
- X-Y-Z Table
- Fix-pitch Stamping Machinery
- Transfer Machinery
- Spinner
- Load/Unload
| Product type: | Motion control card |
|---|---|
| Interface: | PCI Express x1 |
| Digital inputs: | 4 |
| Isolation: | 2500 Vrms (with DN-8468) |
| Operating temperature: | -20 ~ +75 °C |
Specifications
| Software | |
|---|---|
| OS Support | Windows 7/10 32/64-bit Windows XP/2000 32-bit |
| Utility | EzGo Utility |
| SDK | Labview 5.0 ~ Labview 8.x |
| Hardware | |
| Connector | 68-pin SCSI-II |
| General | |
| No. of Axes | 4 |
| Operation Mode | Semi-closed Loop |
| Synchronous Action | 10 activation factors and 14 actions |
| Speed Profile | T/S-curve |
| Position Control Mode | Incremental mode and Absolute mode |
| Command Type | Pulse Command |
| Isolation | 2500 Vrms optical isolation (with DN-8468) |
| Axis I/O | |
| Servo Interface Output | SVON |
| Mechanical Switch Input | Home, LMT+/-, NHOME, EMG |
| Position Compare Output | 10 KHz (X and Y only) |
| Servo Interface Input | INP, ALM |
| Encoder Input | |
| Mode | A/B Phase, Up/Down |
| Ring Counter Mode | 32-bit |
| Counting Rate | 4 MHz (Max.) |
| Counter Width | 32-bit |
| Pulse Output | |
| Mode | CW/CCW, PULSE/DIR |
| Counter Width | 32-bit |
| Rate | 4 MHz (Max.) |
| Interpolation | |
| Circular | Any 2 axes |
| Linear | Any 2 to 3 of 4 axes |
| Digital Input | |
| Channels | Local: 4 DI |
| PC Bus | |
| Type | PCI Express x1 |
| Power | |
| Consumption | +12 V @ 200 mA +3.3 V @ 500 mA |
| Environment | |
| Operating Temperature | -20 ~ +75°C |
| Storage Temperature | -30 ~ +85°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Zaloguj się