PCI-1602U Universal PCI DAQ Board, 100 kS/s 16-bit AI Multifunction Card
Universal PCI multifunction board with 32 single-ended or 16 differential 16-bit analogue inputs at up to 100 kS/s, plus 2 analogue outputs and 16 digital inputs and 16 digital outputs.
- Universal PCI interface compatible with both 3.3 V and 5 V PCI bus
- 32 single-ended or 16 differential 16-bit analogue inputs, jumper selectable
- 100 kS/s AD converter with 8 K-sample hardware FIFO and MagicScan multi-channel scanning
- Programmable gain of 1, 2, 4 and 8 with bipolar ranges from ±1.25 V to ±10 V
- 2-channel 12-bit analogue output with ±5 V and ±10 V ranges
- 16-channel 5 V/TTL digital input with pull-high and pull-low resistors, plus 16-channel digital output
815,00 € per piece
| 1–9 pcs | 815,00 € | |
|---|---|---|
| 10–30 pcs | 790,00 € | −3 % |
| 31+ pcs | 774,00 € | −5 % |
Informacje dot. produktu "PCI-1602U Universal PCI DAQ Board, 100 kS/s 16-bit AI Multifunction Card"
The PCI-1602U CR is a high-performance multifunction card for high-speed analogue and digital I/O on a PC. It uses the Universal PCI interface, so it runs on either a 3.3 V or a 5 V PCI bus. The 16-bit AD converter samples at up to 100 kS/s, buffered by an 8 K-sample hardware FIFO and a MagicScan controller for multi-channel scanning.
The analogue inputs can be configured as 32 single-ended or 16 differential channels using jumpers, with a programmable gain of 1, 2, 4 or 8 and bipolar ranges from ±1.25 V to ±10 V. Two 12-bit analogue outputs and 16 channels each of 5 V/TTL digital input and output complete the I/O set. Pull-high and pull-low resistors on the digital inputs hold a predefined state when channels are disconnected or interrupted.
A Card ID switch lets software identify this board when two or more PCI-1602U cards are installed in the same computer. Software support covers Linux, DOS and Windows, with a DLL, an ActiveX control and sample programs for several development environments. This ordering code includes one CA-4002 D-Sub connector.
Applications
- High speed data acquisition systems
- Process monitoring and control
- Vibration analysis
- Digital pattern generation from the digital I/O port
| Product type: | DAQ board |
|---|---|
| Interface: | Universal PCI |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 Male 20-bit ribbon x 2 |
| Card ID | Yes (4-bit) |
| Analog Input | |
| Channels | 32 single-ended/16 differential |
| Range | Gain: 1, 2, 4, 8 Bipolar Range: ±10 V, ±5 V, ±2.5 V, ±1.25 V |
| Resolution | 16-bit |
| Accuracy | 0.01 % of FSR ±1 LSB @ 25 °C, ±10 V |
| Sampling Rate | PCI-1602U：100 kS/s. Max. PCI-1602FU：200 kS/s. Max. |
| Input Impedance | 10 MΩ/6 pF |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Zero Drift | ±4 ppm/°C of FSR |
| FIFO Size | 8192 samples |
| Trigger Mode | Software, Internal programmable pacer, External (5 V/TTL) |
| Data Transfer | Polling |
| Analog Output | |
| Channels | 2 |
| Range | Bipolar:±5 V, ±10 V |
| Resolution | 12-bit |
| Accuracy | 0.06% of FSR ±1 LSB @ 25 °C, ±10 V |
| Response Time | 1.0 MHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 8.33 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 (Independent x 1/Internal pacer x 1/External pacer x 1) |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Input Frequency | 10 MHz Max. |
| Reference Clock | Internal: 8 MHz |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 16-bit |
| Power | |
| Consumption | 300 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 105 x 188 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Zaloguj się