USB-2026 USB I/O Module, 5-ch AI, 2-ch AO, 2-ch DI/DO
USB bus powered multifunction I/O module with 5 analog inputs, 2 analog outputs, 2 digital inputs and 2 digital outputs, supplied with a 1.5 m USB cable.
- Multifunction module: 5 analog inputs, 2 analog outputs, 2 digital inputs and 2 digital outputs in one unit
- USB bus powered, with one cable carrying both I/O and power; lockable USB cable included
- Individual channel configuration, with per-channel input ranges from ±150 mV to ±20 mA as stated in the introduction
- 4 ~ 20 mA current outputs with open wire detection
- Digital outputs with overload and short-circuit protection, load current 700 mA per channel
- 240 Vrms overvoltage protection on voltage inputs
€ 228,00 per piece
| 1–9 pcs | € 228,00 | |
|---|---|---|
| 10–30 pcs | € 221,00 | −3 % |
| 31+ pcs | € 217,00 | −5 % |
Productinformatie "USB-2026 USB I/O Module, 5-ch AI, 2-ch AO, 2-ch DI/DO"
The USB-2026 CR brings analog and digital I/O to a PC or box PC over a single USB 2.0 full-speed connection. It combines five differential analog inputs, two 12-bit analog outputs, two digital inputs and two digital outputs in a compact, portable housing that draws its power from the USB bus, so no separate supply wiring is needed. This makes it a practical choice where a full PC I/O card would be awkward to fit or service.
Each analog input can be set to its own voltage or current range, which suits mixed sensor layouts without changing hardware. Analog outputs support voltage and 4 ~ 20 mA current ranges, with open wire detection on the 4 ~ 20 mA outputs. Both digital outputs are isolated open collector sink types with overload and short-circuit protection, and can be set to alarm output behaviour.
The CR variant ships with a 1.5 m USB cable (CA-USB15) that can be locked in place. ICP DAS supplies an API library and demo programs with source code for Windows and Linux, covering VB, C++, C#.NET, VB.NET and LabVIEW, so the module can be integrated into custom applications without installing a separate driver.
Applications
- Automation
- Measurement and testing
- Laboratory research
| Product type: | USB I/O Module |
|---|---|
| Interface: | USB 2.0 Full-Speed |
| Digital inputs: | 2 |
| Digital outputs: | 2 |
| Analog inputs: | 5 |
| Analog outputs: | 2 |
| Power input: | USB bus powered |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | 1 Hardware watchdog (1.6 second) 1 Software watchdog (Programmable) |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal 8 kV air for random point |
| LED Indicators | |
| Status | 3 x Power and Communication |
| Analog Input | |
| Channels | 5 Differential |
| Type | Voltage Current |
| Range | Voltage: ±1 V, ±2.5 V, ±5 V, ±10 V Current: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | Normal Mode: 14-bit Fast Mode: 12-bit |
| Accuracy | Normal Mode: ±0.1% FSR Fast Mode: ±0.5 % FSR |
| Sampling Rate | Normal Mode: 10 Hz Fast Mode: 200 Hz |
| Input Impedance | Voltage: 20 MΩ Current: 135 Ω |
| Overvoltage Protection | Voltage: 120 VDC Current: N/A |
| Overcurrent Protection | Voltage: N/A Current: Yes, 50 mA at 110 VDC |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Analog Output | |
| Channels | 2 |
| Range | Voltage: +0 ~ +5 VDC, +0 ~ +10 VDC, ±5 VDC, ±10 VDC Current: +0 ~ +20 mA, +4 ~ +20 mA |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Voltage Output Capability | 10 V @ 20 mA |
| Power-on Value | Yes |
| Safe Value | Yes |
| Digital Input/Counter | |
| Channels | 2 |
| Type | Dry Contact, Source |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Max. Counts | 32-bit |
| Frequency | 100 Hz |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 KΩ, 0.5 W |
| Overvoltage Protection | ±57 VDC |
| Digital Output | |
| Channels | 2 |
| Type | Isolation Open Collector (Sink) |
| Load Voltage | +3.5 ~ +50 VDC |
| Load Current | 700 mA/Channel |
| Overvoltage Protection | ±60 VDC |
| Overload Protection | 1.4 A (with short-circuit protection) |
| Short-circuit Protection | Yes |
| Power on Value | Yes, Programmable |
| Safe Value | Yes, Programmable |
| USB | |
| Specification | USB 2.0 Full-Speed (12Mbps) |
| Power | |
| Consumption | 2.2 W |
| Mechanical | |
| Dimensions (mm) | 33 x 110 x 96 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Aanmelden