PROFI-5060 PROFIBUS DP I/O Module, 8-ch DI and 4-ch Relay Output
PROFIBUS DP-V0 slave remote I/O module with 8 isolated digital inputs and 4 Form C relay outputs, configured through a GSD file in any PROFIBUS configurator.
- PROFIBUS DP-V0 slave with automatic transmission rate detection
- 8 digital inputs, sink or source, isolated from each other, 3750Vrms isolation
- 4 Form C relay outputs rated 0.6A@125VAC and 2A@30VDC
- Configured with a GSD file in any PROFIBUS configurator
- Rotary switch address setting from 0 to 99
- 3000 VDC DC isolation on the PROFIBUS side and 4kV ESD protection per terminal
€ 262,00 per piece
| 1–9 pcs | € 262,00 | |
|---|---|---|
| 10–30 pcs | € 255,00 | −3 % |
| 31+ pcs | € 249,00 | −5 % |
Productinformatie "PROFI-5060 PROFIBUS DP I/O Module, 8-ch DI and 4-ch Relay Output"
PROFI-5060 CR is a PROFIBUS DP-V0 slave I/O module that brings eight digital inputs and four relay outputs onto a PROFIBUS network. It suits engineers who need simple discrete I/O on a fieldbus segment without a dedicated controller at the remote location.
The digital inputs accept sink or source wiring and are isolated from each other, with 3750Vrms isolation. The four relay outputs are Form C contacts rated 0.6A@125VAC and 2A@30VDC. Bus-side isolation is 3000 VDC for DC-to-DC and 2500 Vrms for bus-to-logic, and each terminal has 4kV ESD protection.
- Address set from 0 to 99 with rotary switches
- Baud rate detected automatically across the listed PROFIBUS rates, up to 12 M
- Module configuration done with the GSD file in any PROFIBUS configurator
The module draws 1 W and mounts on a DIN-rail. It is rated for an operating temperature of -25 ~ +75℃, with a storage range of -30 ~ +80 ℃.
Applications
- Industrial automation
- Factory automation
- Process automation
| Product type: | Remote I/O module |
|---|---|
| Interface: | PROFIBUS |
| Protocol: | DP-V0 |
| Digital inputs: | 8 |
| Relay outputs: | 4 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| LED Indicators | |
|---|---|
| Status | PWR LED, RUN LED |
| Digital Input | |
| Channels | 8 Channels (Sink or Source), Isolated from each other Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V Input Impedance: 3KΩ in series with opto-coupler Isolation Voltage: 3750Vrms |
| Digital Output | |
| Channels | 4 Channels (Form C ) Contact Rating: 0.6A@125VAC, 2A@30VDC Operating Time: 3ms. Release Time: 2ms. (Typical) Minimum Life: 500,000 Ops. |
| PROFIBUS | |
| Controller | Profichip VPCLS2 |
| Transceiver | ADI ADM2486 |
| Baud Rate | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Protocol | DP-V0 |
| Power | |
| Consumption | 1 W |
| Mechanical | |
| Dimensions (mm) | 91 x 128 x 52 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Aanmelden