PPDS-755D-MTCP Serial-to-Ethernet Device Server, 1x RS-232/4x RS-485, PoE
Programmable serial-to-Ethernet device server with 1x RS-232 and 4x RS-485 ports, PoE, and a Modbus TCP to RTU/ASCII gateway function for bringing serial devices onto Ethernet networks.
- 1x RS-232 and 4x RS-485 serial ports, with serial ESD protection of +/-4 kV
- Modbus TCP to RTU/ASCII gateway function for SCADA and HMI communication
- Virtual COM operation via the VxComm utility, supporting 32/64-bit Windows 7 SP1/10/2012/2016
- Programmable device server with Xserver structure and built-in MiniOS7, booting in about one second
- IEEE 802.3af Class 1 Power over Ethernet, or +12 ~ 48 VDC terminal block power
- Watchdog timer and self-tuner ASIC controller on the RS-485 port
€ 370,00 per piece
| 1-9 pcs | € 370,00 | |
|---|---|---|
| 10-30 pcs | € 359,00 | −3 % |
| 31+ pcs | € 351,00 | −5 % |
Productinformatie "PPDS-755D-MTCP Serial-to-Ethernet Device Server, 1x RS-232/4x RS-485, PoE"
PPDS-755D-MTCP is a programmable device server that connects RS-232 and RS-485 serial devices to an Ethernet network. Its built-in COM ports can be presented as standard virtual COM ports on a Windows PC through the VxComm utility, so existing serial software can often keep working over the network without changes to the application.
The unit combines a programmable Xserver structure with the MiniOS7 operating system, which boots in about one second. It also operates as a Modbus TCP to RTU/ASCII gateway, allowing Modbus TCP SCADA or HMI systems to communicate with Modbus RTU or ASCII slave devices on the serial side. Power can be supplied over Ethernet via IEEE 802.3af Class 1 PoE, or from a +12 ~ 48 VDC terminal block.
This variant has a plastic casing with DIN-rail or wall mounting and an operating range of -25 ~ +75 °C. The removable terminal block eases wiring in industrial installations. A CA-0910 cable is included with the order.
Applications
- Factory automation
- Building automation
- Home automation
| Product type: | Serial-to-Ethernet device server |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | Modbus TCP |
| Ports: | 1x RS-232, 4x RS-485 |
| PoE: | IEEE 802.3af, Class 1 |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| EEPROM | 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles. |
| Flash | 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power/PoE 5 x digit 7 Segment |
| Ethernet | |
| Ports | 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) |
| COM Ports | |
| Ports | 1 x 5-wire RS-232 4 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1/COM2. |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM5 |
| Stop Bit | 1, 2: for COM1 ~ COM5 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 2.9 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 mm x 35 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Aanmelden