PET-7H16M PoE Ethernet High-Speed DAQ Module, 8-ch 16-bit Simultaneous AI
PoE Ethernet data acquisition module with eight 16-bit analogue inputs sampled at up to 200 kS/s per channel, plus 4 digital inputs, 4 digital outputs and counters for high-speed measurement.
- 8 single-ended 16-bit analogue inputs, up to 200 kS/s per channel
- Programmable ±10 V and ±5 V input ranges with 0.05 % FSR accuracy
- Multiple trigger modes, including analogue threshold and external clock synchronisation
- 1 high-speed and 4 low-speed 32-bit counters, latched with ADC sampling
- 4 digital inputs and 4 digital outputs, with output short-circuit protection
- 10/100BASE-T Ethernet port with PoE (IEEE 802.3af, Class 2) or external power
€ 545,00 per piece
| 1–9 pcs | € 545,00 | |
|---|---|---|
| 10–30 pcs | € 529,00 | −3 % |
| 31+ pcs | € 518,00 | −5 % |
Productinformatie "PET-7H16M PoE Ethernet High-Speed DAQ Module, 8-ch 16-bit Simultaneous AI"
The PET-7H16M is a PoE-capable Ethernet data acquisition module for high-speed analogue measurement over the network. Eight single-ended 16-bit inputs are sampled simultaneously at up to 200 kS/s per channel, and the input range is programmable between ±10 V and ±5 V.
The module also provides four digital inputs, four isolated open-collector digital outputs with short-circuit and overload protection, and one high-speed plus four low-speed 32-bit counters. The low-speed counter values are latched in step with ADC sampling, so counts can be correlated directly with the analogue data. Acquisition can be triggered by software, an external digital event, an analogue threshold or an external clock, with pre-, post- and delay-trigger options.
Data can be streamed over TCP or read through Modbus TCP, in either continuous or N-sample transmission mode. Software support covers Windows 7/8/10 and Linux, with SDKs for Microsoft VC, C#, VB.NET and C/C++, a NI LabVIEW toolkit and Python demos. This listing is for ordering code PET-7H16M CR.
Applications
- High-speed acquisition via Ethernet
- Temperature, vibration and strain high-speed measurement
- High-voltage and high-current high-speed measurement
| Product type: | Data acquisition module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 4 |
| Digital outputs: | 4 |
| Analog inputs: | 8 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Metal |
Specifications
| Software | |
|---|---|
| OS | Windows 7/8/10 and Linux |
| Protocol | TCP Streaming (Access data by SDK library) Modbus TCP |
| Utility | Configuration, graphically display and data logging |
| SDK | Windows 。Microsoft VC, C#, VB.NET SDK API and Demo 。Python Demo 。NI LabVIEW Toolkit and Demo Linux 。C/C++ library and Demo 。.NET library and Demo 。Python Demo |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ± 4 kV for power |
| ESD (IEC 61000-4-2) | ±4 kV contact for each terminal , ±8 kV air for random point |
| LED Indicators | |
| Status | 1 x System, 1 x Ethernet, 1 x PoE |
| Analog Input | |
| Channels | 8 Single-ended (Simultaneously) |
| Range | Bipolar Input (Programmable): ± 10 V, ± 5 V |
| Resolution | 16-bit |
| Accuracy | 0.05 % FSR @ ±10 V, ±5 V |
| Sampling Rate | 200 kS/s (Each channel) |
| FIFO Size | 2 k samples |
| Trigger Mode | Programmable: Software/External clock trigger/Digital trigger (Post-trigger/Pre-trigger/Delay-trigger), Analog threshold trigger |
| Synchronous Input | Yes |
| External Clock/Digital Trigger | |
| Trigger Type | Falling edge |
| Trigger Pulse Width | 1.5 µs Min. |
| ON Voltage Level | +5 ~ 5.5 VDC @ 15 mA |
| OFF Voltage Level | < 0.8 VDC |
| Counter | 32 bits Max. Count, 30 kHz Max. Input Frequency |
| Digital Input/Counter | |
| Channels | 4 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink |
| ON Voltage Level | +5 ~ +30 VDC |
| OFF Voltage Level | 1 VDC Max. |
| Max. Counts | 32-bit |
| Frequency | 1 kHz Max. |
| Isolation | 2500 VDC |
| Digital Output | |
| Channels | 4 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 ~ 30 VDC |
| Load Current | 100 mA |
| Overload Protection | 1.3 A |
| Short-circuit Protection | Yes |
| Isolation | 2500 VDC |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X) |
| PoE | Yes, IEEE 802.3af, Class 2 |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP Slave, Private TCP Raw Data |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.6 W (Max.) |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 76 x 120 x 38 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Aanmelden