PDS-220FC Serial-to-Fiber Device Server with Modbus Gateway
Programmable serial-to-fibre device server with one RS-232 and one RS-422/485 port, a multi-mode SC fibre link over 2 km and a Modbus TCP to RTU/ASCII gateway.
- Converts RS-232 and RS-422/485 serial devices to one 100Base-FX multi-mode SC fibre link up to 2 km
- Modbus TCP to RTU/ASCII gateway function
- Programmable device server built on the MiniOS7 runtime
- Virtual COM utility extends COM ports on supported 32/64-bit Windows systems
- Watchdog timer and +/-4 kV ESD protection on the serial port
- Self-tuner ASIC controller on the RS-485 port
€ 279,00 per piece
| 1–9 pcs | € 279,00 | |
|---|---|---|
| 10–30 pcs | € 271,00 | −3 % |
| 31+ pcs | € 265,00 | −5 % |
Productinformatie "PDS-220FC Serial-to-Fiber Device Server with Modbus Gateway"
PDS-220FC CR is a programmable device server that carries RS-232 and RS-422/485 serial traffic over multi-mode fibre. Fitting it to a serial device lets you extend the link to 2 km through a 100Base-FX SC port, where copper cabling would suffer from electrical noise, ground potential differences or the risk of sparks.
Because the fibre path is immune to electromagnetic interference and does not radiate, the unit suits sites with heavy motor, relay or welding equipment, flammable atmospheres and high-security installations. The built-in MiniOS7 runtime and programmable structure let engineers tailor the device server to their own network application, and the Modbus TCP to RTU/ASCII gateway function allows Modbus TCP clients to reach serial slaves.
The unit mounts on a DIN rail, is powered from 12 to 48 VDC with reverse polarity protection, and is rated for operation from -25 to +75 °C. A watchdog timer and ESD protection on the serial port support reliable operation in harsh environments.
Applications
- Factory automation
- Building automation
- Home automation
| Product type: | Serial device server |
|---|---|
| Interface: | 100Base-FX, RS-232, RS-422/485 |
| Protocol: | Modbus TCP |
| Ports: | 2 serial, 1 fiber |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| Flash | 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycle |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power 2 x Ethernet |
| Ethernet | |
| Ports | 100 Base-FX (SC connector) |
| COM Ports | |
| Ports | 1 x 5-wire RS-232 1 x RS-485/RS-422 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space |
| Data Bit | 7, 8 |
| Stop Bit | 1, 2 |
| Node Address | 254 (max.) |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 0.14 A @ 24 VDC |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Fire Retardant Plastic |
| Dimensions (mm) | 31 mm x 157 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +85 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Aanmelden