PISO-DA8U Universal PCI Isolated Analog Output Board, 8-ch 14-bit
8-channel, 14-bit isolated analog output board for universal PCI slots, with ±10 V and 0 ~ 20 mA outputs, 16 TTL digital inputs and 16 TTL digital outputs. Includes one CA-4002 D-Sub connector.
- 8 analog output channels at 14-bit resolution, individually selectable as ±10 V voltage or 0 ~ 20 mA current output
- 2500 V bus-type isolation, with a built-in DC/DC converter rated for 3000 VDC protection
- 16 channels of 5 V/TTL digital input with pull-high and pull-low function
- 16 channels of 5 V/TTL digital output
- Universal PCI (3.3 V/5 V) interface, 32-bit, 33 MHz
- Software calibration with calibration data saved in EEPROM
477,00 € per piece
| 1–9 pcs | 477,00 € | |
|---|---|---|
| 10–30 pcs | 463,00 € | −3 % |
| 31+ pcs | 453,00 € | −5 % |
Produkta informācija "PISO-DA8U Universal PCI Isolated Analog Output Board, 8-ch 14-bit"
The PISO-DA8U CR is an 8-channel, 14-bit isolated analog output card for universal PCI slots, aimed at engineers who need to drive analog outputs from a PC. Each channel can be set individually to voltage (±10 V) or current (0 ~ 20 mA) output, so one board can serve mixed field devices without rewiring the host.
Designed as a drop-in replacement for the PIO-DA series, the card works without changes to existing software or drivers. Its 2500 V bus-type isolation protects the host PC from surges, and calibration is handled in software with the data stored in EEPROM, so no jumpers or trim-pots are needed.
The board also provides 16 channels of 5 V/TTL digital input and 16 channels of 5 V/TTL digital output, three 16-bit timer/counter channels and an onboard 4-bit Card ID switch for identifying boards when two or more are installed in one computer. This configuration is suited to high-speed data acquisition, process monitoring and control, vibration analysis and digital pattern generation.
Applications
- High speed data acquisition systems
- Process monitoring and control
- Vibration analysis
- Digital pattern generation from digital I/O port
| Product type: | PCI DAQ board |
|---|---|
| Interface: | Universal PCI |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog outputs: | 8 |
| Isolation: | 2500 V |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Card ID | Yes (4-bit) |
| Analog Output | |
| Channels | PISO-DA4U : 4 PISO-DA8U : 8 PISO-DA16U : 16 |
| Range | Voltage: ±10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ±2 LSB @ 25 °C, ± 10 V |
| Response Time | 333 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Isolation | 2500 V (Bus Type) |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | PISO-DA4U : 2200 mA @ +5 V PISO-DA8U : 2400 mA @ +5 V PISO-DA16U : 3000 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 105 x 188 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt