PISO-DA2U Universal PCI Isolated Analog Output Board, 2-ch 12-bit
A universal 3.3 V/5 V PCI board with two 12-bit analog outputs, 3750 VDC bus and channel isolation, and software calibration. Pin-compatible with the PISO-DA2 and needs no software or driver changes.
- Universal PCI (3.3 V/5 V) interface, 32-bit, 33 MHz
- 12-bit, 2-channel analog output with unipolar or bipolar ranges
- 3750 VDC bus and channel isolation, 3000 VDC power isolation
- Per-channel voltage or current output configuration
- Software calibration with calibration data saved in EEPROM
- Two timer-triggered interrupt sources
295,00 € per piece
| 1–9 pcs | 295,00 € | |
|---|---|---|
| 10–30 pcs | 286,00 € | −3 % |
| 31+ pcs | 280,00 € | −5 % |
Produkta informācija "PISO-DA2U Universal PCI Isolated Analog Output Board, 2-ch 12-bit"
The PISO-DA2U CR is a PCI analog output board with two channels, built for engineers who need isolated voltage or current outputs in a host PC. It uses the universal PCI interface (3.3 V/5 V) and is a direct replacement for the PISO-DA2, requiring no changes to existing software or drivers.
Each channel can be set to voltage or current output independently, with its own range: ±10 V, ±5 V, 0 ~ 10 V, 0 ~ 5 V, 0 ~ 20 mA or 4 ~ 20 mA. Isolation is rated at 3750 VDC for bus and channel-to-channel protection and 3000 VDC for power. Calibration is done in software rather than with jumpers or trim-pots, and the calibration data is stored in EEPROM.
- Two-channel, 12-bit analog output with double-buffered DA latch
- Board recognition via onboard 4-bit Card ID switch when multiple boards are installed
- Two D-Sub connectors (male DB9 x 2) and two CA-PC09M connectors included with this ordering code
Applications
- High speed data acquisition system
- Harsh environment operation
- Signal isolation
| Product type: | PCI analog output board |
|---|---|
| Interface: | Universal PCI (3.3 V/5 V) |
| Analog outputs: | 2 |
| Isolation: | 3750 VDC |
| Operating temperature: | 0 ~ +60°C |
Specifications
| Hardware | |
|---|---|
| Connector | Male DB9 x 2 |
| Card ID | Yes (4-bit) |
| Analog Output | |
| Channels | 2 |
| Range | Voltage: ±10 V, ±5 V, 0 ~ 10 V, 0 ~ 5 V Current: 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | 12-bit |
| Accuracy | 0.015% of FSR ±1/2 LSB @ 25 °C, ±10 V |
| Response Time | 500 kHz |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.15 V/μs |
| Isolation | 3750 VDC (Bus Type, CH-to-CH) |
| Operation Mode | Static Update |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | 1350 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 98 x 189 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt