ISO-P64 ISA Bus Isolated 64-Channel Digital Input Board
64-channel photo-isolated digital input board for ISA bus PCs, arranged in four isolated banks with 3750 Vrms isolation. Supplied with CA-4037W cable and two CA-4002 D-Sub connectors.
- 64 isolated digital inputs in four isolated banks
- Dry and wet contact support with photocoupler inputs, sink/source operation
- Input supply selectable by jumper: built-in DC/DC converter or external power
- 3750 Vrms isolation (using external power) and 3000 VDC isolation from the built-in converter
- Interrupt handling with channel 0 and channel 16 as interrupt sources
- 4 kHz typical response speed, static update trigger mode
215,00 € per piece
| 1–9 pcs | 215,00 € | |
|---|---|---|
| 10–30 pcs | 208,00 € | −3 % |
| 31+ pcs | 204,00 € | −5 % |
Produkta informācija "ISO-P64 ISA Bus Isolated 64-Channel Digital Input Board"
The ISO-P64 CR is an ISA bus data acquisition board that brings 64 optically isolated digital inputs into a PC. The inputs are split into four isolated banks, so field signals are kept electrically separate from the host computer, which helps eliminate ground-loop problems and protects the PC from damaging voltages.
Each input uses a photocoupler and accepts either dry (volt-free) or wet contact signals. The input supply can be set by jumper to the board's internal DC/DC converter, which draws power from the PC side, or to an external supply. Inputs 0 to 15 and 32 to 47 form group A, while inputs 16 to 31 and 48 to 63 form group B. Channels 0 and 16 can be used as interrupt sources.
Field wiring is made through a female DB37 connector and a 40-pin box header, with the CA-4037W cable and two CA-4002 D-Sub connectors included in this ordering code. Each D-Sub connector carries 16 input and 16 output channels, so the board suits factory automation, product test and laboratory automation setups.
Applications
- Factory Automation
- Product Test
- Laboratory Automation
| Product type: | Digital input board |
|---|---|
| Interface: | ISA |
| Digital inputs: | 64 |
| Isolation: | 3750 Vrms |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 40-pin Box header x 1 |
| Digital Input | |
| Channels | 64 |
| Type | Dry + Wet Contact Photocoupler |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: 5 ~ 15 V (Max 24 V) |
| OFF Voltage Level | Dry: Open Wet: 0 ~ 1 V |
| Response Speed | 4 kHz (Typical) |
| Trigger Mode | Static Update |
| Isolation | 3750 Vrms (Using external power) |
| PC Bus | |
| Type | ISA |
| Data Bus | 8-bit |
| Power | |
| Consumption | 400 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 115 x 175 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Ienākt