WISE-7117 Intelligent I/O Module, 8-ch AI, 4-ch DO and PoE
WISE-7117 CR web-configured I/O module with 8 differential analog inputs, 4 isolated open-collector outputs and PoE, with Modbus TCP for SCADA integration.
- Browser-based configuration with IF-THEN-ELSE logic; no programming or extra software tool required
- 8 differential 16-bit analog inputs, individually configurable and jumper-selectable for voltage or current
- 4 isolated open-collector digital outputs, sink type, 700 mA per channel
- IEEE 802.3af Class 1 PoE or 12 ~ 48 VDC terminal block power input
- Modbus TCP protocol for SCADA system integration
- Timer, internal register, recipe and advanced P2P functions with non-SSL email and CGI command sending
281,00 € per piece
| 1–9 pcs | 281,00 € | |
|---|---|---|
| 10–30 pcs | 273,00 € | −3 % |
| 31+ pcs | 267,00 € | −5 % |
Prekės informacija "WISE-7117 Intelligent I/O Module, 8-ch AI, 4-ch DO and PoE"
The WISE-7117 CR is a standalone I/O controller that is configured entirely through its built-in web interface. Engineers can build IF-THEN-ELSE control logic in a browser without writing code or installing a separate software tool, which shortens commissioning for remote control and monitoring tasks.
The module provides 8 differential, 16-bit analog inputs and 4 isolated open-collector digital outputs. Each analog channel can be given its own range, and jumpers select voltage or current input. Power can come from an IEEE 802.3af Class 1 PoE connection over a single Ethernet cable, or from a 12 ~ 48 VDC terminal block when PoE is not available.
Modbus TCP support allows the module to be integrated with SCADA software. Timer, internal register, recipe and advanced P2P functions, together with non-SSL email and CGI command sending, extend its use in building, factory and machine automation and remote diagnosis systems.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital outputs: | 4 |
| Analog inputs: | 8 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail / wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Analog Input | |
| Channels | 8 (Differential) |
| Type | ±150 mV, ±500 mV, ±1V, ±5V, ±10V ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | ±0.1% |
| Sampling Rate | 10 Sample/Sec. (Total) |
| Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | 240 Vrms |
| Overcurrent Protection | Yes, 50 mA at 110 VDC |
| Individual Channel Configuration | Yes |
| Channel-to-Channel Isolation | ±400 VDC |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Digital Output | |
| Channels | 4 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 VDC ~ +50 VDC |
| Load Current | 700 mA/Channel |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.2 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prisijungti