FR-2053iTA FRnet I/O Module, 16-ch Isolated Sink/Source DI
16-channel isolated Sink/Source digital input module with an FRnet interface, for extending remote I/O control from PC, PAC and PLC systems. Ordering code FR-2053iTA CR.
- 16 isolated wet-contact digital inputs with Sink/Source (NPN/PNP) support, ON level +3.5 ~ +30 VDC
- Wire-saving FRnet DI control over 2-wire Belden 9841 twisted-pair cable
- Selectable 250 kbps (max. 400 m) or 1 Mbps default (max. 100 m) via DIP switch
- Broadcasting (1:n) transmission, easy output duplication and fixed I/O scan time with synchronisation
- 3000 Vrms intra-module isolation and 3750 Vrms digital input isolation
- EFT, ESD and surge protection to IEC 61000-4-4, IEC 61000-4-2 and IEC 61000-4-5
157,00 € per piece
| 1–9 pcs | 157,00 € | |
|---|---|---|
| 10–30 pcs | 152,00 € | −3 % |
| 31+ pcs | 149,00 € | −5 % |
Prekės informacija "FR-2053iTA FRnet I/O Module, 16-ch Isolated Sink/Source DI"
The FR-2053iTA CR adds 16 isolated digital inputs to an FRnet network. Each channel accepts wet-contact signals in either Sink or Source (NPN/PNP) configuration, with an ON level of +3.5 ~ +30 VDC, so it suits a wide range of field sensors and switches.
FRnet modules can be daisy-chained, letting engineers grow the remote input count without running a separate cable for every point. Wire-saving DI control, broadcasting (1:n) transmission and fixed I/O scan time with synchronisation keep the network simple to plan and predictable in operation.
Power is supplied at +10 ~ +30 VDC with reverse polarity protection. The plastic DIN-rail module is rated for -25 ~ +75 °C operation and carries EFT, ESD and surge immunity to IEC 61000-4-4, -2 and -5 respectively. Selectable transfer speeds of 250 kbps or 1 Mbps (default) give a choice between distance and cycle time.
Applications
- Remote digital input acquisition for PC, PAC and PLC control
- Distributed input expansion using daisy-chained FRnet I/O modules
| Product type: | Remote I/O module |
|---|---|
| Interface: | FRnet |
| Digital inputs: | 16 |
| Isolation: | 3000 Vrms |
| Power input: | 10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Isolation | |
|---|---|
| Intra-module Isolation | 3000 Vrms |
| EMS Protection | |
| EFT (IEC 61000-4-4) | Yes |
| ESD (IEC 61000-4-2) | Yes |
| Surge (IEC 61000-4-5) | Yes |
| LED Indicators | |
| Status | Power, Communication Run, Communication Error, Terminal Resistor, Digital Input |
| Digital Input | |
| Channels | 16 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source (NPN/PNP) |
| ON Voltage Level | +3.5 ~ +30 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Isolation | 3750 Vrms |
| Input Impedance | 3 KΩ |
| FRnet | |
| Wire Cable | 2-wire cabling Belden 9841 (2P twisted-pair cable), When different cables are used, the transmission distance may change |
| Transfer Speed | 250 kbps and 1Mbps (Default) DIP Switch Settings |
| Transfer Distance | Max. 400 m for speed 250 kbps Max. 100 m for speed 1M (Default) |
| Cyclic Time | 2.88 ms for speed 250 K 0.72 ms for speed 1M (Default) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC (Isolation) |
| Consumption | 2.4 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 102 x 107 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +85 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prisijungti