DP-1200 24 VDC/5 A DIN-Rail Power Supply, 85~264 VAC Input, 120 W

DP-640 is a 40 W switching power supply with universal AC input, converting 90~264 VAC to a regulated 24 VDC output rated at 1.7 A. It suits engineers who need a compact, DIN-rail mounted 24 VDC source for control equipment without manually selecting an input range.Protection is built in: overload and short-circuit conditions are handled by auto-recovery, and over-voltage is handled by a crowbar circuit. The output holds up for more than 20 ms at rated load and 115 VAC, which helps ride through brief mains interruptions. Cooling is by free air convection, so no fan is required.The metal casing measures 44 x 150 x 125 mm. The unit is rated for an operating temperature of 0 ~ 50 °C and a storage temperature of -20 °C ~ +85 °C, and is marked RoHS and WEEE.Applications24 VDC power supply for DIN-rail mounted industrial control cabinets

DP-660 is a 65 W switch-mode power supply with a universal input of 85 ~ 270 VAC and a 47 Hz ~ 63 Hz frequency range. It provides a +24 VDC/2.5 A main output together with a +5 VDC/0.5 A output.The unit is aimed at powering devices such as motors and solenoids. Its built-in +5 V output is intended for supplying a logic control circuit alongside the power-device load, so one supply can serve both roles in a control cabinet.The DP-660 has a metal casing for DIN-rail mounting and cools by free air convection. Its outputs are protected against short circuits, which latch off, and it offers a typical hold-up time of 16 ms at rated load and 115 VAC. Operating range is 0 ~ 50 °C, with storage from -40 °C to +85 °C.ApplicationsPowering motors and solenoidsSupplying logic control circuits alongside power-device loadsIndustrial control cabinets

The ES25A48-DA1 CR is a desktop-style AC-DC power supply that accepts a universal 90~264 VAC input and delivers a 48 VDC output rated at 0.52 A, or 25 W. It suits engineers who need a compact, mains-fed 48 VDC source for bench work or equipment installed on a desk.Protection covers short circuit, overload and over voltage, with the over voltage function implemented as a Zener diode clamp. The fully enclosed plastic case houses the unit, and the listed approvals include CE, UKCA, FCC, RoHS and WEEE.Key electrical figures include a 47-63 Hz input frequency range, a typical efficiency of 82%, a maximum ripple and noise of 180 mVp-p, and a typical hold up time of 16 ms at full load. The operating range is 0 °C to +50 °C.ApplicationsDesktop equipment requiring a 48 VDC supplyBench and test setups powered from mainsPowering 48 VDC devices from a 90~264 VAC source

The ES25A48-DA1-DIN CR is a 25 W DIN-rail power supply that accepts a full-range 90~264 VAC input and delivers a regulated 48 VDC output rated at 0.52 A. It suits engineers who need a compact, single-output supply for control cabinet installations.Protection features include short-circuit, overload and over-voltage protection, with the over-voltage function implemented as a Zener diode clamp. The fully enclosed plastic case houses the unit in a 74 × 109 × 52 mm footprint for DIN-rail mounting.The unit carries CE, UKCA, FCC, RoHS and WEEE marks, and its safety and EMC approvals are listed in the source as UL60950-1, CSA C22.2, TÜV EN60950-1, BSMI CNS14336, EN55022 class B, FCC Part 15 and CISPR22 class B. It operates from 0 °C to +50 °C.ApplicationsDC supply for loads in industrial control cabinets48 VDC power for DIN-rail mounted equipment