NS-206AFC-T Unmanaged Ethernet Switch, 4x RJ-45 + 2x Multi-Mode SC Fiber
Unmanaged 4-port 10/100 Mbps Ethernet switch with two multi-mode SC fibre ports for noise-immune, up to 2 km links. Redundant +12 to +48 VDC inputs suit common industrial power supplies.
- Two 100Base-FX multi-mode fibre ports with SC connectors, plus four 10/100Base-TX RJ-45 ports
- Redundant +12 to +48 VDC power inputs with reverse polarity protection
- Relay alarm output rated 2 A @ 30 VDC for power fault signalling
- Store-and-forward processing with 2048-entry MAC table and 1 Mbit frame buffer memory
- IEEE 802.3x and back pressure flow control, plus broadcast storm protection
- 1500 Vrms isolation for 1 minute and ±4 kV contact ESD protection
259,00 € per piece
| 1–9 pcs | 259,00 € | |
|---|---|---|
| 10–30 pcs | 251,00 € | −3 % |
| 31+ pcs | 246,00 € | −5 % |
Informacije o proizvodu "NS-206AFC-T Unmanaged Ethernet Switch, 4x RJ-45 + 2x Multi-Mode SC Fiber"
NS-206AFC-T CR is an unmanaged industrial Ethernet switch that combines four RJ-45 copper ports with two 100Base-FX multi-mode fibre ports fitted with SC connectors. It is intended for connecting devices over copper while carrying the uplink or longer runs over fibre, where electrical noise would otherwise be a concern. Transmissions run at 100 Mbps over distances of up to 2 km when 62.5/125 μm fibre is used.
The switch accepts a wide +12 to +48 VDC supply with redundant power inputs and reverse polarity protection, so it can be fed from several common DC standards without an external converter. A relay alarm output and status LEDs (PWR1, PWR2, PWR_Fault, Link/Act, 10/100M) give visibility of power and link health.
Its store-and-forward switching, 2048-entry MAC table and IEEE 802.3x flow control make it suitable for simple, unmanaged network segments. It mounts on a DIN rail and is rated for an operating range of -30 °C to +75 °C.
Applications
- Industrial automation networks where electrical noise may affect copper links
- Connecting remote Ethernet devices over multi-mode fibre segments of up to 2 km
- Installations with redundant DC supplies in the +12 to +48 VDC range
| Product type: | Unmanaged Ethernet switch |
|---|---|
| Interface: | RJ-45, SC multi-mode fibre |
| Ports: | 6 (4 RJ-45 + 2 SC) |
| Isolation: | 1500 Vrms |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -30 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact |
| LED Indicators | |
| Status | PWR1, PWR2, PWR_Fault, Link/Act, 10/100M |
| Ethernet | |
| Ports | 4 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward |
| MAC Table | 2048 |
| Frame Buffer Memory | 1 Mbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| Fiber | |
| Ports | 2 x 100 Base-FX, SC connector |
| Mode | Multi-Mode |
| Fiber Cable | 50/125, 62.5/125 or 100/140 μm |
| Distance | 2 km, (62.5/125 μm recommended) for full duplex |
| Wavelength | 1300 or 1310nm |
| TX Output | -20 dBm Min. -14 dBm Max. |
| RX Sensitivity | -32 dBm |
| RX Overload | -8 dBm |
| Budget | 12 dBm |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +12 ~ +48 VDC (Redundant input) |
| Redundant Power Inputs | Yes |
| Consumption | 0.14 A @ 24 VDC |
| Alarm Output | Yes,Relay 2 A @ 30 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 31 x 157 x 123 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava