M-7017R-G 8-ch Analog Input Module, High Voltage Protection, Modbus RTU/DCON
8-channel differential voltage and current analog input module with 240 Vrms overvoltage protection and Modbus RTU or DCON communication over RS-485, for DIN-rail mounting.
- 8 differential inputs for voltage (±150 mV to ±10 V) and current (±20 mA, 0 ~ 20 mA, 4 ~ 20 mA)
- 240 Vrms overvoltage protection and ±200 VDC common voltage protection
- 16-bit resolution with selectable Normal Mode (10 Hz) or Fast Mode (60 Hz)
- 3000 VDC intra-module isolation and ±4 kV ESD contact protection on each terminal
- 1 x RS-485 port supporting Modbus RTU and DCON at 1200 ~ 115200 bps
- Built-in dual watchdog for module and communication
252,00 € per piece
| 1–9 pcs | 252,00 € | |
|---|---|---|
| 10–30 pcs | 245,00 € | −3 % |
| 31+ pcs | 240,00 € | −5 % |
Informacije o proizvodu "M-7017R-G 8-ch Analog Input Module, High Voltage Protection, Modbus RTU/DCON"
The M-7017R-G is an 8-channel differential analog input module for RS-485 remote I/O networks. Each channel accepts voltage or current signals, so one module can cover a wide range of sensors and transmitters. Its input protection is designed for electrically demanding sites, with 240 Vrms overvoltage protection and ±200 VDC common voltage protection on the inputs.
The sampling rate can be set to Normal Mode (10 Hz, 0.1% of FSR) or Fast Mode (60 Hz, 0.5% of FSR), so engineers can trade accuracy against update speed. Channels can be configured individually, and the module communicates using Modbus RTU or DCON, selected through software configuration. A built-in dual watchdog monitors both the module and communication.
The -G suffix identifies the gray-cover version. The 4 ~ 20 mA current range requires an optional external 125 Ω resistor, and open wire detection is available for 4 ~ 20 mA inputs only. The module is rated for an operating temperature of -25 ~ +75 °C and is powered from +10 ~ +30 VDC.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Analog Input Module |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON, Modbus RTU |
| Analog inputs: | 8 |
| Ports: | 1 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| Intra-module Isolation | 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Analog Input | |
| Channels | 8 Differential |
| Type | Voltage Current |
| Range | Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V Current: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (requires an optional external 125 Ω resistor) |
| Resolution | 16-bit |
| Accuracy | Normal Mode: 0.1% of FSR Fast Mode: 0.5% of FSR |
| Sampling Rate | Normal Mode: 10 Hz Fast Mode: 60 Hz |
| Input Impedance | Voltage: 2 MΩ |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | 240 Vrms |
| Individual Channel Configuration | Yes (*Note1) |
| Open Wire Detection | For 4 ~ 20 mA Only |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) |
| Protocol | Modbus RTU, DCON |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 1.3 W |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava