F-8015 8-ch Isolated RTD Input Redundant Module, Pt100/JPt100/Pt1000
Eight-channel, 16-bit RTD input module with per-channel programmable range, 3000 VDC isolation and redundant switching for the iDCS-8000 system.
- 8 RTD input channels for Pt100, JPt100 and Pt1000 sensors
- 16-bit resolution with user-defined up/down scale on each channel
- Accuracy of ±0.05% FSR (±250 mΩ)
- 3000 VDC isolation from input to backplane and from input to frame ground
- Open wire detection
- Redundancy with switching time below 100 µs
463,00 € per piece
| 1–9 pcs | 463,00 € | |
|---|---|---|
| 10–30 pcs | 450,00 € | −3 % |
| 31+ pcs | 440,00 € | −5 % |
Informacije o proizvodu "F-8015 8-ch Isolated RTD Input Redundant Module, Pt100/JPt100/Pt1000"
F-8015 CR is an 8-channel RTD input module for the iDCS-8000 system. It accepts Pt100, JPt100 and Pt1000 sensors, with a 16-bit resolution and a user-definable up/down scale on every channel, so the input range can be tailored to the measurement.
The module suits applications where measurement accuracy and fault containment matter. Each input is isolated at 3000 VDC from both the backplane and frame ground, so a high voltage or current fault on a channel should not propagate to other components in the iDCS-8000 system. Open wire detection flags broken sensor connections.
Redundancy support with a fast switching time of under 100 µs makes the F-8015 CR a candidate for designs that need continuity of temperature monitoring. It is typically used in building, factory and machine automation, as well as remote diagnosis and maintenance and test equipment.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | RTD Input Module |
|---|---|
| Analog inputs: | 8 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Yes |
| ESD (IEC 61000-4-2) | Yes |
| LED Indicators | |
| Status | 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status) |
| Analog Input | |
| Channels | 8 |
| Type | RTD |
| Sensor Type | Pt100, JPt100, Pt1000 |
| Range | Pt100: -200 ~ +850 ℃ JPt100, Pt1000: -200 ~ +630 ℃ |
| Resolution | 16 bit |
| Accuracy | ±0.05% FSR (±250 mΩ) |
| Sampling Rate | 8 Samples/sec (Total) |
| Input Impedance | 20 MΩ |
| Common Mode Rejection | 106 dB |
| Normal Mode Rejection | 90 dB |
| Overvoltage Protection | Yes |
| Zero Drift | ±0.5 μV/°C |
| Span Drift | ±20 ppm/°C |
| Isolation | 3000 VDC |
| Analog Output | |
| Open Wire Detection | Yes |
| I/O Expansion | |
| I/O Type | DN-RTD-M |
| Power | |
| Consumption | 1 W |
| Mechanical | |
| Dimensions (mm) | 30 x 85 x 115 |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava