ET-7083 Ethernet I/O Module, 3-ch 32-bit Encoder/Counter Input
Three-axis Ethernet encoder/counter module with 32-bit inputs, up to 4 MHz counting, FRAM counter retention and Modbus TCP/UDP support for DIN-rail installation.
- Three independently configurable axes for Quadrant, CW/CCW or Pulse/Direction counting
- 32-bit encoder/counter inputs with maximum rates of 1 MHz (Quadrant) and 4 MHz (CW/CCW, Pulse/Direction)
- Counter value retention after power-off
- Modbus TCP and Modbus UDP protocol support over one 10/100 Base-TX RJ-45 port
- Built-in web server with web HMI
- Dual watchdog: module and communication, programmable
266,00 € per piece
| 1–9 pcs | 266,00 € | |
|---|---|---|
| 10–30 pcs | 258,00 € | −3 % |
| 31+ pcs | 253,00 € | −5 % |
Informacije o proizvodu "ET-7083 Ethernet I/O Module, 3-ch 32-bit Encoder/Counter Input"
The ET-7083 CR is a three-axis encoder and counter module for Ethernet networks. Each axis can be set individually to Quadrant, CW/CCW or Pulse/Direction counting, so one unit can serve several motion or position feedback inputs without additional counter hardware. Quadrant counting tops out at 1 MHz, while CW/CCW and Pulse/Direction modes reach 4 MHz.
Counter values can be kept through a power loss thanks to FRAM-based retention, which can be enabled or disabled as required. The module supports Modbus TCP and Modbus UDP, and includes a built-in web server with web HMI for configuration and monitoring, along with ID, password and IP filter access control.
Power is supplied from a terminal block at +10 ~ +30 VDC with reverse polarity protection. The module measures 72 x 123 x 35 mm, mounts on a DIN rail, and operates from -25 ~ +75 °C. It carries CE, UKCA, FCC, RoHS and WEEE marks.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis
- Testing equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | 10/100 Base-TX, RJ-45 |
| Protocol: | Modbus TCP, Modbus UDP |
| Ports: | 1 |
| Isolation: | Ethernet 1500 VDC, I/O 2500 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet |
| Counter/Frequency/Encoder Input | |
| Channels | 3-axis |
| Counter Mode | Quadrant CW/CCW Pulse/Direction |
| Bits | 32-bit |
| ON Voltage Level | 5 V: +3.5 ~ +5 VDC 12 V with 1 kΩ External Resistor: +5 ~ +12 VDC 24 V with 2 kΩ External Resistor: +7 ~ +24 VDC |
| OFF Voltage Level | +2 VDC (max.) |
| Individual Channel Configuration | Yes |
| Max. Speed | Quadrant mode: 1 MHz CW/CCW mode: 4 MHz Pulse/Direction mode: 4 MHz |
| Counter Value Retention | Yes |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.7 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava