CAN-2088D DeviceNet Slave Module, 8-ch PWM Output, 8-ch High Speed Counter
DeviceNet slave module with 8 PWM outputs (0.2 Hz to 500 kHz) and 8 high speed counter inputs for motor, lamp and fan control on DeviceNet networks.
- Eight hardware-controlled PWM outputs, 0.2 Hz to 500 kHz, 0.1% to 99.9% duty cycle
- Software or hardware trigger, with individual or synchronous channel triggering
- Burst and continuous output modes, burst count 1 to 65535
- 32-bit 500 kHz high speed counter on each digital input channel
- DeviceNet slave, passed DeviceNet conformance test, baud rates 125, 250 and 500 kbps
- Explicit Messaging, Polled I/O and Bit-Strobe I/O connections supported
237,00 € per piece
| 1–9 pcs | 237,00 € | |
|---|---|---|
| 10–30 pcs | 230,00 € | −3 % |
| 31+ pcs | 225,00 € | −5 % |
Informacije o proizvodu "CAN-2088D DeviceNet Slave Module, 8-ch PWM Output, 8-ch High Speed Counter"
CAN-2088D is a DeviceNet slave module that generates PWM signals on eight outputs and counts pulses on eight high speed inputs. It suits engineers who need precise hardware-timed output waveforms and fast counting without a dedicated motion controller, with the DeviceNet master handling supervision.
Each PWM channel can be triggered individually or all together in synchronous mode, using either software or hardware triggering. Burst and continuous output modes are supported, with burst counts from 1 to 65535. Each digital input channel includes a 32-bit counter running at up to 500 kHz. The module is supplied with an EDS file for configuring the DeviceNet master interface.
The manufacturer lists communication with several DeviceNet masters and gateways, including Allen-Bradley 193-DNENCAT and 193-DNENCATR, and OMRON CJ1W-DRM21, CS1W-DRM21-V1, C200HW-DRM21-V1 and 3G8F7-DRM21-E. The module mounts on a DIN rail and operates from +10 VDC to +30 VDC over -25 to +75 °C.
Applications
- Motor position and speed control
- Lamp brightness dimming
- Fan speed control
- High speed counting
| Product type: | Fieldbus I/O module |
|---|---|
| Interface: | DeviceNet |
| Protocol: | DeviceNet |
| Digital inputs: | 8 |
| Ports: | 1 |
| Power input: | +10 VDC ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| LED Indicators | |
|---|---|
| Status | 1 x Power 2 x DeviceNet status |
| Digital Input | |
| Channels | 8 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink |
| ON Voltage Level | +5.5 ~ +30 V |
| OFF Voltage Level | <3.5 V |
| Input Impedance | 4.7 kΩ, 1/4 W |
| PWM | |
| Channels | 8 |
| Sink/Source (NPN/PNP) | Source |
| Load Current | 1 mA |
| Frequency | 0.2 ~ 500 kHz (non-continuous) |
| Duty Cycle | 0.1 ~ 99.9 % |
| Mode | Burst mode, Continuous mode |
| Burst Count | 1~65535 counts |
| Trigger Start | Hardware (Start and Stop) or Software (Start and Stop) |
| DeviceNet | |
| Ports | 1 |
| Connection Supported | 1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
| Baud Rate | 125 kbps, 250 kbps, 500 kbps |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| Node ID | 0 ~ 63 |
| Shutdown Message | Yes |
| Heartbeat Message | Yes |
| Subscribe | Group 2 Only Server |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 2 W |
| Mechanical | |
| Dimensions (mm) | 32.3 x 99 x 77.5 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava