CAN-2053D DeviceNet Slave Module, 16-ch Isolated Wet Digital Input
DeviceNet slave module with 16 isolated sink/source digital inputs for PNP, NPN, TTL and relay contact signals, for DeviceNet general I/O networks.
- 16 isolated sink/source digital inputs, wet type, ON level +3.5 ~ +30 VDC
- DeviceNet Group 2 Only Server (non UCMM-capable) with predefined master/slave connection set
- One connection each for Explicit Messaging, Polled I/O and Bit-Strobe I/O
- Baud rates of 125 kbps, 250 kbps and 500 kbps
- EDS file provided for DeviceNet master interface configuration
- Switchable 120 Ω terminal resistor on the DeviceNet port
177,00 € per piece
| 1–9 pcs | 177,00 € | |
|---|---|---|
| 10–30 pcs | 172,00 € | −3 % |
| 31+ pcs | 168,00 € | −5 % |
Informacije o proizvodu "CAN-2053D DeviceNet Slave Module, 16-ch Isolated Wet Digital Input"
The CAN-2053D CR is a DeviceNet slave I/O module that brings 16 isolated wet-type digital inputs onto a DeviceNet network. Each input accepts sink or source signals, so it can monitor PNP, NPN, TTL and relay contact outputs from field devices without changing the module.
The module operates as a Group 2 Only Server, which is not UCMM-capable, and supports the predefined master/slave connection set. It provides one connection each for Explicit Messaging, Polled I/O and Bit-Strobe I/O. An EDS file is supplied for configuring the module from a DeviceNet master interface.
Choose this model when you need a compact, DIN-rail mounted input node for switch detection or alarm monitoring on a DeviceNet bus. Each channel has 4 kV contact ESD protection, and the module runs from +10 VDC to +30 VDC over a -25 ~ +75 ℃ operating range.
Applications
- Alarm detector
- Switch detection
| Product type: | Digital input module |
|---|---|
| Interface: | DeviceNet |
| Protocol: | DeviceNet |
| Digital inputs: | 16 |
| Ports: | 1 |
| Isolation: | Isolated |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 ℃ |
| Mounting: | DIN-rail |
Specifications
| LED Indicators | |
|---|---|
| Status | 1 x Power 2 x DeviceNet status |
| Digital Input | |
| Channels | 16 (Sink/Source) |
| Type | Wet |
| ON Voltage Level | +3.5 ~ +30 VDC |
| OFF Voltage Level | +1 VDC Max. |
| Input Impedance | 3 kΩ, 0.3 W |
| DeviceNet | |
| Ports | 1 |
| Connection Supported | 1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
| Baud Rate | 125 kbps, 250 kbps, 500 kbps |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| Node ID | 0 ~ 63 |
| Shutdown Message | Yes |
| Heartbeat Message | Yes |
| Subscribe | Group 2 Only Server |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 1.5 W |
| Mechanical | |
| Dimensions (mm) | 32.3 x 99 x 77.5 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prijava