PPDS-742D-MTCP PoE Serial-to-Ethernet Device Server, 3x RS-232/1x RS-485
Programmable Modbus TCP gateway and serial device server with 3x RS-232, 1x RS-485, PoE and LED display, for connecting legacy serial devices to Ethernet networks.
- Three RS-232 ports and one RS-485 port bridged to 10/100 Base-TX Ethernet
- Modbus TCP to RTU/ASCII gateway for SCADA and HMI communication
- Virtual COM support with the VxComm utility for Windows 7 SP1/10/2012/2016 (32/64-bit)
- Programmable Xserver structure running on the built-in MiniOS7
- IEEE 802.3af, Class 1 PoE or +12 ~ 48 VDC terminal block power
- Serial port ESD protection of +/-4 kV and a watchdog timer
332,00 € per piece
| 1–9 pcs | 332,00 € | |
|---|---|---|
| 10–30 pcs | 322,00 € | −3 % |
| 31+ pcs | 316,00 € | −5 % |
Informations sur le produit "PPDS-742D-MTCP PoE Serial-to-Ethernet Device Server, 3x RS-232/1x RS-485"
PPDS-742D-MTCP links three RS-232 devices and one RS-485 device to an Ethernet network, so existing serial equipment can be reached from PCs, SCADA and HMI systems without replacing it. The built-in virtual COM support lets software written for local COM ports keep working over the network, and the unit also acts as a Modbus TCP to RTU/ASCII gateway for Modbus TCP clients.
The unit is built around a programmable Xserver structure and the MiniOS7 runtime, so custom Ethernet logic can be added to the serial interfaces. Each serial port has ESD protection rated at +/-4 kV, and the RS-485 port uses a self-tuner ASIC controller. A watchdog timer supports operation in harsh environments.
Power can be supplied over Ethernet via IEEE 802.3af, Class 1 PoE, or from a +12 ~ 48 VDC terminal block. The removable terminal block and DIN-rail or wall mounting suit panel installation, and a single-LED power/PoE indicator plus a five-digit 7-segment display show status on the unit. This ordering code includes the CA-0910 cable.
Applications
- Factory automation
- Building automation
- Home automation
| Product type: | Serial device server |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | Modbus TCP |
| Ports: | 4 serial, 1 Ethernet |
| PoE: | IEEE 802.3af, Class 1 |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| EEPROM | 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles. |
| Flash | 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power/PoE 5 x digit 7 Segment |
| Ethernet | |
| Ports | 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) |
| COM Ports | |
| Ports | 2 x 5-wire RS-232 1 x 9-wire RS-232 1 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1/COM2. |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM4 |
| Stop Bit | 1, 2: for COM1 ~ COM4 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 2.9 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 mm x 35 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Connexion