MDR-60-24 DIN-Rail Power Supply, 85~264 VAC to 24 VDC/2.5 A, 60 W
A 60 W DIN-rail power supply with universal 85~264 VAC input, delivering 24 VDC at 2.5 A, with short-circuit, overload and over-voltage protection.
- Universal AC input, 85~264 VAC, with 120~370 VDC input range
- 24 VDC output, 2.5 A rated current, 60 W rated power
- Short circuit, overload and over-voltage protection
- DC OK relay contact rated 30V/1A resistive
- Power-on LED indicator
- Mounts on DIN rail TS-35/7.5 or 15, free air convection cooling
51,00 € per piece
| 1–9 pcs | 51,00 € | |
|---|---|---|
| 10–30 pcs | 50,00 € | −2 % |
| 31+ pcs | 49,00 € | −4 % |
Tuotetiedot "MDR-60-24 DIN-Rail Power Supply, 85~264 VAC to 24 VDC/2.5 A, 60 W"
The MDR-60-24 CR is a 60 W DIN-rail power supply that accepts a universal 85~264 VAC input and provides a regulated 24 VDC output rated at 2.5 A. It suits engineers who need a compact, single-output supply for control cabinets and automation panels, with a 120~370 VDC input range also specified.
Protection is built in against short circuit, overload and over-voltage. Overload is handled by constant current limiting that recovers automatically once the fault is removed, while over-voltage shuts down the output until the unit is re-powered. A DC OK relay contact and a power-on LED aid status monitoring.
The unit mounts on TS-35/7.5 or 15 DIN rails and is cooled by free air convection, with an operating range of -20 ~ +70 °C. It is NEC class 2/LPS compliant for the 24 V and 48 V models, and draws less than 0.75 W at no load.
| Product type: | Power supply |
|---|---|
| Relay outputs: | 1 |
| Power input: | 85 ~ 264 VAC |
| Operating temperature: | -20 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Safety | |
|---|---|
| Standard | UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant (24V,48V only) |
| EMC | |
| Standard | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3, EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A |
| Input | |
| Voltage Range | 85 ~ 264 VAC 120 ~ 370 VDC |
| Frequency Range | 47 ~ 63 Hz |
| Inrush Current (Typ.) | COLD START 30 A/115 VAC 60 A/230 VAC |
| Leakage Current | <1 mA / 240 VAC |
| Output | |
| Ripple & Noise (Max.) | 150mVp-p |
| Voltage Adj. Range | 24 ~ 30 V |
| Voltage Tolerance | ±1.0% |
| Linearity | ±1.0% |
| Load Regulation | ±1.0% |
| Setup, Rise Time | 500 ms, 30 ms/230 VAC 500 ms, 30 m/115 VAC at full load |
| DC Voltage | 24 V |
| Rated Power | 60 W |
| Rated Current | 2.5 A |
| Efficiency | 88% |
| Protection | |
| Over Voltage | 31.2 ~ 36V Protection type : Shut down o/p voltage, re-power on to recover |
| Overload | 105 ~ 160% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed |
| Function | |
| DC OK Active Signal (Max.) | 30V/1A resistive |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | (40 * 90 * 100) mm |
| Environment | |
| Operating Temperature | -20 ~ +70 °C |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 20 ~ 90% RH non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään