WISE-7255 PoE Intelligent I/O Module, 8-ch DI/DO with Modbus TCP
Web-configured WISE I/O module with 8 dry/wet digital inputs, 8 isolated open-collector outputs, a 2-port Ethernet switch and IEEE 802.3af PoE, with Modbus TCP support for SCADA integration.
- Browser-based configuration with IF-THEN-ELSE logic rules and no programming required
- 8 dry/wet contact digital inputs (sink/source) and 8 isolated open-collector outputs (source type)
- 650 mA per output channel at 25 °C with short-circuit protection
- IEEE 802.3af Class 1 PoE or 12 ~ 48 VDC terminal block power input
- Modbus TCP protocol for SCADA system integration
- 2-port 10/100 Base-TX Ethernet switch for daisy-chain topology
288,00 € per piece
| 1–9 pcs | 288,00 € | |
|---|---|---|
| 10–30 pcs | 279,00 € | −3 % |
| 31+ pcs | 274,00 € | −5 % |
Tuotetiedot "WISE-7255 PoE Intelligent I/O Module, 8-ch DI/DO with Modbus TCP"
The WISE-7255 CR is a standalone intelligent I/O module from the WISE series that handles remote control and monitoring without a separate PLC or custom firmware. Its built-in web pages let you create IF-THEN-ELSE control logic in the browser, so there is no need to write code or install a dedicated software tool.
On the I/O side, the module provides 8 digital inputs that accept dry or wet contacts (sink/source) and 8 isolated open-collector outputs (source type), each rated for 650 mA per channel at 25 °C. Timer operations, I/O channel monitoring and control, and non-SSL email or CGI command sending are included. Power can come from IEEE 802.3af Class 1 PoE or from a 12 ~ 48 VDC terminal block input.
A two-port Ethernet switch allows daisy-chain wiring, and Modbus TCP support makes integration with SCADA systems straightforward. The WISE-7255 CR is listed as RoHS compliant and suits building, factory and machine automation as well as remote maintenance and diagnostic equipment.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | I/O module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 8 |
| Digital outputs: | 8 |
| Ports: | 2 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 16 x I/O Channel Status |
| Digital Input/Counter | |
| Channels | 8 |
| Type | Dry + Wet Contact |
| Sink/Source (NPN/PNP) | Dry: Source Wet: Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: +10 VDC ~ +50 VDC |
| OFF Voltage Level | Dry: Open Wet: +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Effective Distance | 500 M Max. |
| Input Impedance | 10 kΩ |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
| Channels | 8 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Source |
| Load Voltage | +10 VDC ~ +40 VDC |
| Load Current | 650 mA/Channel at 25 °C |
| Overvoltage Protection | 47 VDC |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators) |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 4.0 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 76 x 120 x 38 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään