WISE-7115 Intelligent I/O Module, 7-ch RTD Input with PoE
Web-configured WISE I/O module with 7 RTD inputs, Modbus TCP and IEEE 802.3af PoE. Runs IF-THEN-ELSE control logic from a browser without programming.
- Seven RTD inputs (Pt100, Pt1000, Ni120, Cu100, Cu1000) with 16-bit resolution
- Individual range configuration per channel
- 3-wire RTD lead resistance elimination and open wire detection
- Browser-based configuration with IF-THEN-ELSE logic, no programming required
- Modbus TCP for SCADA system integration
- IEEE 802.3af PoE (Class 1) or 12 ~ 48 VDC terminal block power
315,00 € per piece
| 1–9 pcs | 315,00 € | |
|---|---|---|
| 10–30 pcs | 306,00 € | −3 % |
| 31+ pcs | 299,00 € | −5 % |
Tuotetiedot "WISE-7115 Intelligent I/O Module, 7-ch RTD Input with PoE"
WISE-7115 CR is a standalone intelligent I/O module that takes seven RTD sensor inputs and makes them available over Ethernet. Control logic is built through the module's built-in web pages using IF-THEN-ELSE rules, so no programming environment or extra software tool is needed. This suits engineers who want local automation and monitoring without the overhead of writing code.
Each RTD channel can be set to its own sensor range. Pt100, Pt1000, Ni120, Cu100 and Cu1000 types are supported, with 3-wire lead resistance elimination and open wire detection for accurate measurement. Modbus TCP allows the module to feed data into SCADA systems.
The unit can be powered from a PoE network under IEEE 802.3af, Class 1, or from a 12 ~ 48 VDC terminal block when PoE is not present. It is rated for an operating range of -25 ~ +75 °C and mounts on a DIN rail or wall.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis and testing equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Analog inputs: | 7 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail/Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Analog Input | |
| Channels | 7 (Differential) |
| Type | RTD (Pt100, Pt1000, Ni120, Cu100, Cu1000) |
| Resolution | 16-bit |
| Accuracy | ±0.05% |
| Sampling Rate | 12 Sample/Sec. (Total) |
| Input Impedance | >1M Ω |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 110 VDC/VAC |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes |
| 3-wire RTD Lead Resistance Elimination | Yes |
| Zero Drift | ±0.5 μV/°C |
| Span Drift | ±20 μV/°C |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 2.6 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään