RFU-IO-433 433 MHz RF Wireless I/O Module, Single-Slot Modbus RTU
433 MHz RF wireless I/O unit with one plug-in XV I/O board slot and Modbus RTU protocol, rated for up to 300 m line-of-sight range at 9600 bps.
- 433 MHz RF link carrying Modbus RTU, with Modbus station IDs 1 to 32
- Line-of-sight range of up to 300 m at 9600 bps and 10 dBm output power
- 16 RF channels at 100 kHz spacing and RF baud rates from 650 to 57600 bps
- Four group IDs (0 to 3) to avoid interference between adjacent networks
- Repeater mode for extended range and dead-zone coverage
- I/O pair-connection mode for host-less remote I/O control
225,00 € per piece
| 1–9 pcs | 225,00 € | |
|---|---|---|
| 10–30 pcs | 218,00 € | −3 % |
| 31+ pcs | 214,00 € | −5 % |
Tuotetiedot "RFU-IO-433 433 MHz RF Wireless I/O Module, Single-Slot Modbus RTU"
The RFU-IO-433 CR extends Modbus RTU control over a 433 MHz radio link. A remote Modbus master, using a 433 MHz wireless converter such as the RFU-433, sends commands over the air to the I/O module on this unit, allowing remote digital or analogue I/O to be used without running cabling to each point.
Radio performance can be tuned to suit site conditions. The unit offers 16 RF channels with 100 kHz spacing, RF baud rates from 650 to 57600 bps, and four group IDs (0 to 3) to keep adjacent 433 MHz networks apart. Output power defaults to 10 dBm and can be raised to a maximum of 19 dBm. Repeater mode can be used to extend reach or cover dead zones, and I/O pair-connection mode allows remote I/O control without a host.
This single-slot version accepts one XV I/O board and is intended for DIN-rail installation. It operates from 10 to 30 VDC and is rated for -25 to +75 °C. Settings are made through rotary and DIP switches, which simplifies commissioning and later equipment replacement.
Applications
- RF I/O mode
- Repeater mode
- 1-to-1 pair-connection mode
- 1-to-many pair-connection mode
| Product type: | RF wireless I/O module |
|---|---|
| Interface: | RF 433 MHz |
| Protocol: | Modbus RTU |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | +/- 1 kV |
| ESD (IEC 61000-4-2) | +/- 4 kV Contact |
| Surge (IEC 61000-4-5) | +/- 1 kV |
| LED Indicators | |
| Status | PWR * 1, Tx * 1, Rx * 1 |
| RF | |
| Antenna | 0 dBi Omni directional, RP-SMA |
| Baud Rate | 650 ~ 57600 bps |
| Channels | 16 |
| Group ID | 0 ~ 3 |
| Protocol | Modbus RTU |
| Radio Frequency | 433.1 MHz ~ 434.6 MHz |
| Transmission Power | Default 10 dBm, Max 19 dBm |
| Transmission Distance (LoS) | 300 m (9600 bps, output power 10 dBm |
| Antenna | |
| Dimensions (mm) | φ7.8 x 108 mm |
| I/O Expansion | |
| I/O Type | plug-in, XV-board |
| Slots | 1 |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 3 W @ 24 VDC |
| Mechanical | |
| Dimensions (mm) | 150 mm x 38 mm x 97 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25℃ ~ +75℃ |
| Storage Temperature | -30℃ ~ +80℃ |
| Humidity | 10 to 90% RH (Non-condensing) |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään