PMC-5151-EN Web-based Power Meter Concentrator with Modbus TCP/RTU Slave
Web-based power meter concentrator that collects data from Modbus power meters and I/O modules, logs to microSD and serves power data over Modbus TCP/RTU, FTP and SNMP.
- Browser-based configuration, monitoring and control logic editing, with no extra software tool required
- Connects up to 24 ICP DAS Modbus power meters and 8 Modbus I/O modules, with a maximum of 16 Modbus TCP modules in total
- COM2 and COM3 isolated RS-485 ports (2500 VDC) each connect up to 16 Modbus RTU modules individually
- Built-in IF-THEN-ELSE logic engine for power demand management and power-status-based I/O control
- microSD data logging with automatic log file send-back and recovery after network resumes
- Email or SMS alarm notification (SMS sending requires GTM-203M-3GWA)
This item is quoted per order. Send us your quantity and we reply with price and delivery time.
Request a quote
Ei enää saatavilla
Tuotetiedot "PMC-5151-EN Web-based Power Meter Concentrator with Modbus TCP/RTU Slave"
The PMC-5151-EN CR is a web-based Power Meter Concentrator that is configured, monitored and programmed entirely through a browser. Live and historical power data can be viewed and statistics reports produced without installing any extra software tool, and control logic is edited on built-in web pages.
The unit reads Modbus power meters over RS-485 or Ethernet and can also drive Modbus TCP and RTU slave I/O modules, including ICP DAS XW-Board and M-7000 series devices. An IF-THEN-ELSE logic engine, timers and schedules support power demand management, with the option of shedding loads when required.
Power data is written to a microSD card, and log files are sent back automatically once a disconnected network is restored. The English-language version has a plastic case, DIN-rail mounting and an operating range of -25 ~ +75 °C.
Applications
- Energy measurement, monitoring and management
- Power demand management
- Load shedding and I/O control based on power status
| Product type: | Power Meter Concentrator |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | FTP, Modbus TCP/RTU, SNMP |
| Ports: | 2 x RJ-45, 3 x COM |
| Isolation: | 2500 VDC (COM2, COM3) |
| Power input: | 10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP/RTU for SCADA software • FTP Client & Server • SNMP & SNMP Trap • DDNS |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (Unlimited rule supported) • Power meters & I/O modules monitoring and control • Data Logger operation • Timer operation (Unlimited set supported) • Schedule operation (Unlimited set supported) • Internal Register operation (48 set supported) • non-SSL & SSL Email sending function • SNTP Time Synchronization |
| Power Management | • Power Data Display • Historical Power Data Report • Power Demand Management • PUE Setting and Display |
| CPU Module | |
| CPU | 32-bit ARM CPU (520 MHz) |
| Storage Expansion | microSD socket with 4 GB microSD card (support up to 32 GB microSDHC card) |
| LED Indicators | |
| Status | 1 x Power/Running |
| I/O Expansion | |
| I/O Type | XW-board |
| Remote Module Support | M-7000/DL Series Module Modbus RTU Slave Module Modbus TCP Slave Module |
| Power Meter | PM Series Modbus meter |
| Ethernet | |
| Ports | RJ-45 x 2, 10/100 Based-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
| COM Ports | |
| Ports | COM 1: RS-232 (RxD, TxD and GND); non-isolated; COM 2: RS-485 (D+, D-); 2500 VDC; isolated; COM 3: RS-485 (D+, D-); 2500 VDC; isolated; |
| Power | |
| Input Range | 10 ~ 30 VDC |
| Consumption | 4.8 W |
| Mechanical | |
| Dimensions (mm) | 91 x 126 x 52 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään