EC4-DA4 EtherCAT SubDevice Slim Module, 4-ch Isolated 12-bit Analog Output
EtherCAT SubDevice slim I/O module with four isolated 12-bit analog outputs, selectable for current or voltage ranges. Suits DIN-rail or wall mounting in distributed control networks.
- EtherCAT SubDevice interface with 100 μs cycle time and distributed clocks
- Four isolated 12-bit analog outputs with 2500 VDC isolation
- Voltage and current ranges: ±5 V, ±10 V, 0 ~ 5 V, 0 ~ 10 V, 0 ~ 10 mA, 0 ~ 20 mA
- Accuracy of ±0.1% of FSR at 25 °C
- Slim 17.5 mm wide plastic housing for DIN-rail or wall mounting
- Removable terminal-block connector
222,00 € per piece
| 1–9 pcs | 222,00 € | |
|---|---|---|
| 10–30 pcs | 215,00 € | −3 % |
| 31+ pcs | 210,00 € | −5 % |
Tuotetiedot "EC4-DA4 EtherCAT SubDevice Slim Module, 4-ch Isolated 12-bit Analog Output"
EC4-DA4 CR is a slim EtherCAT SubDevice that adds four isolated 12-bit analog outputs to a control network. Each channel can be set to a voltage or current range, including ±5 V, ±10 V, 0 ~ 5 V, 0 ~ 10 V, 0 ~ 10 mA and 0 ~ 20 mA, so one module can drive a wide variety of field devices.
Communication runs over EtherCAT with a 100 μs cycle time and distributed clock support. Running the analog outputs from the bus rather than from individual parallel wiring reduces the number of cables needed for a given point count, and output values can be monitored in software. The module has passed conformance testing and is intended for use with a range of standard EtherCAT MainDevices.
The housing is plastic and measures 17.5 x 108 x 73 mm (W x L x D, excluding terminals). It mounts on a DIN rail or to a wall and uses a removable terminal-block connector. The module is rated for operation from -25 to +70 °C and is supplied from +24 VDC, with 2500 VDC isolation on the outputs.
Applications
- Distributed analog output control in EtherCAT networks
- Driving voltage or current setpoints to field devices in panel and machine control
- Systems where reducing cabling for analog outputs is a priority
| Product type: | Analog output module |
|---|---|
| Interface: | EtherCAT |
| Protocol: | EtherCAT |
| Analog outputs: | 4 |
| Isolation: | 2500 VDC |
| Power input: | +24 VDC |
| Operating temperature: | -25 ~ +70 °C |
| Mounting: | DIN-rail or wall |
| Housing: | Plastic |
Specifications
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ±8KV (Air for Random Point) |
| Analog Output | |
| Channels | 4 |
| Range | ±5 V, ±10 V, 0 ~ 5V, 0 ~ 10V, 0 ~ 10 mA, 0 ~ 20 mA |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR (25℃) |
| Isolation | 2500VDC |
| EtherCAT | |
| Cycle Time | 100 μs |
| Distributed Clocks | Yes |
| Power | |
| Input Range | +24 VDC |
| Consumption | 3.5 W |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 17.5 x 108 x 73 (W x L x D)(excluding terminals) |
| Installation | DIN-Rail or Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +70°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään