CAN-2024C CANopen Slave Module, 4-ch 14-bit Analogue Output
CANopen slave module with four 14-bit analogue outputs, supporting CiA DS-301 v4.02 and DSP-401 v2.1, PDO mapping and a default EDS file for standard CANopen masters.
- CANopen slave module with 4 analogue output channels at 14-bit resolution
- Selectable voltage and current output ranges, including 4~20 mA and 0~10 V
- Compliant with CiA DS-301 v4.02 and DSP-401 v2.1, with PDO mapping support
- Default EDS file provided for use with standard CANopen masters
- Baud rates from 10 k to 1 M, built-in 120 Ω terminal resistor and node IDs 1 to 99
- Hardware watchdog, power-on value setting and 4 kV contact ESD protection per channel
353,00 € per piece
| 1–9 pcs | 353,00 € | |
|---|---|---|
| 10–30 pcs | 342,00 € | −3 % |
| 31+ pcs | 335,00 € | −5 % |
Tuotetiedot "CAN-2024C CANopen Slave Module, 4-ch 14-bit Analogue Output"
The CAN-2024C CR is a DIN-rail CANopen slave module that drives four analogue outputs at 14-bit resolution. It suits engineers who need to control field actuators such as valves, drives and transducer inputs from a CANopen network without building custom fieldbus firmware.
Each channel can be configured for 0~5 V, ±5 V, 0~10 V, ±10 V, 0~20 mA or 4~20 mA output. Voltage output accuracy is ±0.1 % of FSR and current output accuracy is ±0.2 % of FSR. The module provides a hardware watchdog, a power-on value setting, and 3000 VDC isolation for DC-to-DC, with 2500 Vrms photo-coupler isolation on the CANopen side.
The module supports NMT slave operation, 10 RxPDOs and 10 TxPDOs with PDO mapping, and node IDs from 1 to 99. A default EDS file is provided, so it can be commissioned with other standard CANopen masters. The unit runs from +10 to +30 VDC, draws 2.5 W, and operates between -25 and +75 °C.
Applications
- Industrial machine control
- Factory automation
- Packaging machine control
- Remote data acquisition
- Environmental monitoring
| Product type: | Fieldbus I/O module |
|---|---|
| Interface: | CANopen |
| Protocol: | CANopen |
| Analog outputs: | 4 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Hardware watchdog |
| LED Indicators | |
| Status | 3 LEDs to PWR, RUN and ERR |
| Analog Output | |
| Channels | 4 |
| Type | 0~ 5 V, +/- 5 V, 0~ 10 V, +/- 10 V, 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | +/- 0.1 % of FSR for voltage output ; +/- 0.2 % of FSR for current output |
| Zero Drift | Voltage: +/-30μV/°C Current:: +/-0.2μV/°C |
| Span Drift | +/-20ppm/°C |
| Voltage Output Capability | 10V@ 5mA |
| Current Load Resistance | External +24 V : 1050 Ohms |
| Power-on Value | Yes |
| Isolation | 3000 VDC |
| CANopen | |
| Baud Rate | 10 k ~ 1 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Built-in 120Ω |
| Protocol | CiA 301 v4.02, CiA 401 v2.1 |
| Node ID | 1 ~ 99 |
| No. of PDOs | 10 RxPDO , 10 TxPDO |
| PDO Mode | Event Triggered, Remotely requested, Cyclic and acyclic SYNC |
| Error Control | Node Guarding protocol or Heartbeat Producer |
| NMT | Slave |
| EMCY Message | Yes |
| Power | |
| Consumption | 2.5 W |
| Mechanical | |
| Dimensions (mm) | 33 x 99 x 78 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Kirjaudu sisään