CA-LLD-DC100X-L010 Liquid Leak Detection Cable with Cable-Break Detection, 1 m
A 1 m liquid leak detection cable for iSN-101/104 systems, adding cable-break detection and snap-in connectors so multiple cables can be chained to a maximum of 500 m.
- Cable-break detection, reported immediately to the iSN-101/104 alarm buzzer when used with the CA-LLD-DC100X-TR terminal resistor
- Snap-in connectors at both ends allow multiple detection cables to be connected in series
- Signal leader cable plus all detection cables can reach a maximum of 500 m
- Sensing wires: 2 x 30 AWG with conductive fluoropolymer jacket
- Fluoropolymer carrier with 6 mm cable diameter
- Maximum continuous operating temperature of 70 °C
56,00 € per piece
| 1-9 pcs | 56,00 € | |
|---|---|---|
| 10-30 pcs | 53,00 € | −5 % |
| 31+ pcs | 50,00 € | −11 % |
Tuotetiedot "CA-LLD-DC100X-L010 Liquid Leak Detection Cable with Cable-Break Detection, 1 m"
The CA-LLD-DC100X-L010 is a 1 m liquid leak detection cable for covering wide, open areas where the likely leak path cannot be predicted in advance. It can be run alongside liquid supply and return lines, and it suits larger surfaces with several potential leak points.
Compared with the standard CA-LLD-DC100-Lxxx cable for iSN-101/104, this variant adds two functions when used with the CA-LLD-DC100X-TR terminal resistor. Cable-break detection reports a broken signal leader cable or detection cable immediately and passes the alarm to the iSN-101/104 buzzer. Snap-in connectors at both ends allow several detection cables to be connected in series.
The signal leader cable plus all detection cables can reach a maximum of 500 m. The 6 mm fluoropolymer-jacketed cable carries two 30 AWG sensing wires and is rated for a maximum continuous operating temperature of 70 °C.
Applications
- Liquid leak detection over wide or open areas
- Monitoring liquid supply and return lines
- Larger surface areas with multiple potential leak points
| Product type: | Liquid leakage detection cable |
|---|---|
| Operating temperature: | 70 °C max continuous |
Kirjaudu sisään
Lisävarusteet
180° Hold-Down Clip (include 50 pcs).
90° Hold-Down Clip (include 50 pcs).
CA-LLD-DC100X-TR is a 2MΩ terminal resistor that fits the end of a liquid leakage detection cable run. The original CA-LLD-DC100-Lxxx detection cable on iSN-101/104 units cannot report a cable break and cannot be wired in series, so this resistor is used to add both capabilities.With the terminal resistor fitted, a break in the signal leader cable or the detection cable is recognised immediately, and the iSN-101/104 raises the alarm buzzer at the same time. Detection cables use snap-in connectors at both ends, so several lines can be joined in series to extend coverage.The signal leader cable and all connected detection cables can cover a maximum distance of 500 metres, which suits longer or more irregular layouts where a single fixed-length cable is impractical.ApplicationsLiquid leakage detection along extended or segmented cable runsMonitoring with iSN-101/104 units where cable-break alarms are required
CA-LLD-EC-L030 is a 3 m leader cable for ICP DAS liquid leakage detection installations. It forms the first section of the sensing run and is designed to be extended in the field where the layout requires more reach.The leader cable accepts extension with shielded twisted pair cable in AWG 18~14. The total cable length, counting the leader cable and the sense cables together, must not exceed 500 m.The cable is listed as RoHS and WEEE compliant, which helps with documentation for European projects.ApplicationsLiquid leakage detectionDistributed leak sensing runs with extended sense cabling
Samankaltaiset tuotteet
The CA-LLD-DC100X-L500 is a 50 m liquid leak detection cable for covering wide, open areas where the path a leak will take is hard to predict. It can be run alongside liquid supply and return lines and suits surfaces with several potential leak points.Compared with the original CA-LLD-DC100-Lxxx cable, this variant adds cable-break detection and can be chained with other detection cables. A break in the signal leader cable or the detection cable is reported immediately to the alarm buzzer of the iSN-101/104 unit.The cable has snap-in connectors at both ends, so several detection cables can be joined in series to extend coverage. The signal leader cable and all detection cables together can reach up to 500 m.Fluoropolymer carrier, 6 mm cable diameterSensing wires: 2 x 30 AWG with conductive fluoropolymer jacketMaximum continuous operating temperature 70 °CRoHS and WEEE certifiedApplicationsLiquid leak detection over larger surface areas with multiple potential leak pointsOpen areas where the path of a leak cannot be predictedMonitoring around liquid supply and return lines
The CA-LLD-DC100X-L300 is a 30 m liquid leak detection cable for monitoring wide areas where the likely leak path cannot be predicted in advance. Its layout suits open sites with several potential leak points.Unlike the standard DC100 cable, this variant adds cable-break detection and snap-in connectors at both ends, so several detection lines can be joined in series. The signal leader cable and all detection cables together can cover up to 500 m. Cable breaks in the signal leader or the detection cable are reported to the iSN-101/104 alarm buzzer.The cable can be connected directly to liquid supply and return lines. Its fluoropolymer carrier and conductive fluoropolymer sensing jacket are rated for a maximum continuous operating temperature of 70 °C.ApplicationsLiquid leak monitoring over large or open surface areasDetection along liquid supply and return linesSites with multiple potential leak points
The CA-LLD-DC100X-L100 is a 10 m liquid leak detection cable for monitoring wide areas where the likely leak path is hard to predict. It suits open sites and larger surfaces with multiple possible leak points, and it can be connected directly to liquid supply and return lines.Compared with the original CA-LLD-DC100-Lxxx detection cable, this version can be joined in series and reports cable breaks. When used with the CA-LLD-DC100X-TR terminal resistor, a break in the signal leader cable or a detection cable is reported immediately to the iSN-101/104, which sounds its alarm buzzer.Snap-in connectors at both ends let several detection cables be chained together. The signal leader cable and all detection cables together can cover up to 500 m.ApplicationsLiquid leak detection over open areasMonitoring larger surface areas with multiple potential leak pointsLeak monitoring at liquid supply and return lines
The CA-LLD-DC100X-L030 is a 3 m liquid leak detection cable suited to monitoring large or open areas where the likely leak path cannot be predicted in advance. Its snap-in connectors allow the cable to be joined in series, so coverage can be extended without a fixed layout.Compared with the original CA-LLD-DC100-Lxxx cable, this variant adds cable-break detection and series connection. The source positions it alongside the iSN-101/104 detectors and the CA-LLD-DC100X-TR terminal resistor. Cable-break detection reports a broken signal leader cable or detection cable, and the cable can be connected directly to liquid supply and return lines.The 6 mm fluoropolymer-carried cable uses 2*30 AWG sensing wires with a conductive fluoropolymer jacket and has a maximum continuous operating temperature of 70°C. The signal leader cable plus all detection cables can reach up to 500 metres in total.ApplicationsLiquid leak monitoring over wide or open areasSurfaces with multiple potential leak pointsLiquid supply and return lines