PISO-DA2U/S Universal PCI 2-ch Isolated Analog Output Board
Universal PCI board with two 12-bit isolated analog outputs, 3750 VDC bus and channel isolation, per-channel voltage or current ranges, and software calibration.
- Two 12-bit analog output channels on a universal PCI (3.3 V/5 V) interface
- 3750 VDC bus and channel isolation and 3000 VDC power isolation
- Per-channel voltage (±10 V, ±5 V, 0 to 10 V, 0 to 5 V) or current (0 to 20 mA, 4 to 20 mA) output
- Software calibration with calibration data stored in EEPROM, no jumpers or trim-pots
- Card ID (4-bit SMD switch) for identifying boards in multi-board systems
- Double-buffered DA latch and two timer-triggered interrupt sources
325,00 € per piece
| 1–9 pcs | 325,00 € | |
|---|---|---|
| 10–30 pcs | 316,00 € | −3 % |
| 31+ pcs | 309,00 € | −5 % |
Información sobre el producto "PISO-DA2U/S Universal PCI 2-ch Isolated Analog Output Board"
PISO-DA2U/S CR is a universal PCI analog output board for engineers who need two isolated 12-bit outputs in a host PC. It works with 3.3 V or 5 V PCI slots and provides 3750 VDC bus-type and channel-to-channel isolation, which suits signal isolation in noisy or demanding environments.
Each channel can be configured independently as a voltage output (±10 V, ±5 V, 0 to 10 V or 0 to 5 V) or a current output (0 to 20 mA or 4 to 20 mA). Calibration is performed in software rather than with jumpers or trim-pots, and the calibration data is stored in EEPROM. The board is stated to be fully compatible with the PISO-DA2 and a direct replacement without changes to software or driver.
The Card ID switch allows the board to be identified in software when two or more boards are installed in the same computer. The package includes two CA-PC09M D-Sub connectors. The source specifications are those published for the PISO-DA2U; the /S suffix is not explained in the source data, so check the ordering code and datasheet before specifying.
Applications
- High speed data acquisition systems
- Harsh environment operation
- Signal isolation
| Product type: | PCI analog output board |
|---|---|
| Interface: | Universal PCI (3.3 V/5 V) |
| Analog outputs: | 2 |
| Isolation: | 3750 VDC |
| Operating temperature: | 0 ~ +60°C |
Specifications
| Hardware | |
|---|---|
| Connector | Male DB9 x 2 |
| Card ID | Yes (4-bit) |
| Analog Output | |
| Channels | 2 |
| Range | Voltage: ±10 V, ±5 V, 0 ~ 10 V, 0 ~ 5 V Current: 0 ~ 20 mA, 4 ~ 20 mA |
| Resolution | 12-bit |
| Accuracy | 0.015% of FSR ±1/2 LSB @ 25 °C, ±10 V |
| Response Time | 500 kHz |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.15 V/μs |
| Isolation | 3750 VDC (Bus Type, CH-to-CH) |
| Operation Mode | Static Update |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | 1350 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 98 x 189 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sesión