MN-3254T Motionnet I/O Module, 16-ch Isolated DI/DO with Terminal Block
Distributed Motionnet I/O module with 16 isolated digital inputs and 16 isolated open-collector sink outputs, supporting up to 64 modules per Motionnet transfer line.
- 16 isolated digital inputs, each port selectable as NPN or PNP (12 to 24 V)
- 16 isolated open-collector sink outputs, 200 mA max per channel, 30 VDC max load
- Motionnet transfer speed selectable at 2.5, 5, 10 or 20 Mbps by DIP switch
- Up to 64 modules per Motionnet transfer line
- 3000 Vrms isolation on digital inputs and outputs, with power, communication and I/O isolated
- Flywheel diode of each output port can be connected to a different power source
218,00 € per piece
| 1–9 pcs | 218,00 € | |
|---|---|---|
| 10–30 pcs | 212,00 € | −3 % |
| 31+ pcs | 207,00 € | −5 % |
Información sobre el producto "MN-3254T Motionnet I/O Module, 16-ch Isolated DI/DO with Terminal Block"
The MN-3254T adds 16 isolated digital inputs and 16 isolated digital outputs to a Motionnet network. Each input port can be set to NPN or PNP operation across 12 to 24 V, so it suits sensors from either sourcing convention.
Motionnet transfer speed is selectable at 2.5, 5, 10 or 20 Mbps by DIP switch. At 20 Mbps the communication time per device is 15.1 μs. Power, communication and I/O are isolated from one another. The outputs are open-collector sink type, rated at 200 mA per channel, with internal flywheel diodes that can be returned to different supplies on each eight-channel port.
LED indicators show communication state, the internal 3.3 V supply, the termination resistor switch and I/O status, which helps with commissioning and fault finding. The plastic housing mounts on a DIN rail and is specified for 0 to +60 °C operation.
Applications
- Machine automation
- Distributed I/O on Motionnet networks
| Product type: | I/O module |
|---|---|
| Interface: | Motionnet |
| Protocol: | Motionnet |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Isolation: | 3000 Vrms |
| Power input: | 24 VDC |
| Operating temperature: | 0 ~ +60 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Hardware | |
|---|---|
| Connector | 13-pin pluggable terminal block x 4 |
| LED Indicators | |
| Status | Communication state (Link, Error) Internal 3.3 V Power Termination Resistor Switch Input/Output state |
| Digital Input | |
| Channels | 16 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source (NPN/PNP) |
| ON Voltage Level | +10 ~ 30 VDC |
| OFF Voltage Level | +3 VDC max. |
| Isolation | 3000 Vrms |
| Input Impedance | 4.7 KΩ |
| Digital Output | |
| Channels | 16 |
| Type | Open Collector, with internal flywheel diode |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +30 VDC max. |
| Load Current | 200 mA max. for each channel |
| Isolation | 3000 Vrms |
| Motionnet | |
| Communication Connectors | 5-pin terminal block |
| Transfer Speed | Selectable 2.5, 5, 10 or 20 Mbps by DIP Switch. |
| Cyclic Time | 15.1 μs per device (20 Mbps) |
| Power | |
| Input Range | 24 VDC (1000 V isolated) |
| Consumption | 2 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 31 mm x 140 mm x 126.6 mm |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sesión