ECAT-2016-3 EtherCAT SubDevice Module, 3-ch 16-bit Strain Gauge Input
16-bit, three-channel strain gauge input module for EtherCAT networks, with full-bridge wiring and two RJ-45 ports for daisy-chain connection.
- Three strain gauge / load cell input channels with full-bridge wiring
- 16-bit resolution, 1 kHz sampling rate per channel and 1 ms cycle time
- Software-selectable input ranges from ±10 V down to ±25 mV
- Two RJ-45 EtherCAT ports supporting daisy-chain connection
- Distance between stations up to 100 m (100BASE-TX)
- Isolated input and output design, with ±35 VDC overvoltage protection on inputs
262,00 € per piece
| 1–9 pcs | 262,00 € | |
|---|---|---|
| 10–30 pcs | 255,00 € | −3 % |
| 31+ pcs | 249,00 € | −5 % |
Información sobre el producto "ECAT-2016-3 EtherCAT SubDevice Module, 3-ch 16-bit Strain Gauge Input"
The ECAT-2016-3 is an EtherCAT SubDevice that brings three strain gauge or load cell inputs onto an EtherCAT network. Each channel accepts a full-bridge resistor bridge directly, with 16-bit resolution and a sampling rate of 1 kHz per channel. Input status is returned through the process data, so an EtherCAT Main Device can read the measurements without custom protocol work.
Two RJ-45 ports allow the module to be daisy-chained, which keeps cabling simple and lets the network be laid out as a star, line or ring. The input and output circuitry is isolated to help protect the module from interference and harsh conditions. Conformance testing with the EtherCAT conformance test tool has been completed.
Each channel can be configured individually, with input ranges from ±10 V down to ±25 mV selectable in software. The range and filter setting function is not supported on this module, and open wire detection is not provided. A +10 V excitation voltage output is included, and the module is housed in a plastic DIN-rail enclosure with a removable terminal block.
Applications
- Semiconductor tools
- Metal forming
- Packaging
- Injection moulding
- Assembly systems
- Printing machines
- Robotics
| Product type: | EtherCAT SubDevice I/O Module |
|---|---|
| Interface: | EtherCAT |
| Protocol: | EtherCAT |
| Analog inputs: | 3 |
| Ports: | 2 x RJ-45 |
| Isolation: | Yes |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Signal: ±1 kV Class A; Power: ±1 kV Class A |
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Channel |
| Surge (IEC 61000-4-5) | ± 1 kV Class A |
| Strain Gauge, Load Cell Input | |
| Channels | 3 |
| Type | Strain Gauge |
| Range | ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±625 mV, ±312 mV, ±200 mV, ±100 mV, ±50 mV, ±25 mV (Software selectable) |
| Wiring | Full-Bridge |
| Accuracy | ±0.1% of FSR |
| Resolution | 16-bit |
| Sampling Rate | 1k Hz per channel |
| Individual Channel Configuration | Yes (Range & Filter setting function is not supported) |
| Open Wire Detection | No |
| Overvoltage Protection | ±35 VDC |
| Excitation Voltage Output | |
| Range | + 10 V |
| EtherCAT | |
| Ports | 2 x RJ-45 |
| Distance Between Stations | 100 m Max. (100Base-TX) |
| Data Transfer Medium | Ethernet/EtherCAT cable (Min. CAT5), shielded |
| Cycle Time | 1 ms |
| Distributed Clocks | N/A |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 4 W Max. |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 108 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Iniciar sesión