WISE-7151 Intelligent I/O Module, 16-ch DI with PoE
Web-configured WISE I/O module with 16 isolated wet contact digital inputs, Modbus TCP support and IEEE 802.3af PoE. Runs IF-THEN-ELSE control logic without programming.
- Browser-based configuration with no extra software tool required
- IF-THEN-ELSE logic rules (36 rules) set up through built-in web pages, no programming needed
- 16 isolated wet contact digital inputs, sink/source, each with counter input (16-bit, 65535 max. counts)
- Modbus TCP protocol for SCADA system integration
- IEEE 802.3af Class 1 PoE, or 12 ~ 48 VDC from terminal block
- Timer (12 sets), internal register (48 sets), recipe (12 sets) and advanced P2P (8 sets) operations
210,00 € per piece
| 1–9 pcs | 210,00 € | |
|---|---|---|
| 10–30 pcs | 203,00 € | −3 % |
| 31+ pcs | 199,00 € | −5 % |
Πληροφορίες για το προϊόν "WISE-7151 Intelligent I/O Module, 16-ch DI with PoE"
The WISE-7151 CR is a networked I/O controller that lets engineers build remote logic and monitoring without writing code. Configuration runs in a standard web browser, and IF-THEN-ELSE rules are set up through the built-in web pages, so no separate software tool is needed.
The module provides 16 isolated wet contact digital inputs, each with counter capability, and communicates over Modbus TCP for integration with SCADA systems. It can take its power from an IEEE 802.3af Class 1 PoE network or from a 12 ~ 48 VDC terminal block, which suits installations where a separate supply or additional cabling is impractical.
Beyond the logic engine, the module offers timer, internal register, recipe and advanced peer-to-peer functions, plus I/O channel monitoring and control. It also supports non-SSL email and CGI command sending. It mounts on DIN-rail or wall, and is rated for an operating range of -25 ~ +75 °C.
Applications
- Building automation
- Factory automation
- Machine automation
- Remote maintenance
- Remote diagnosis and testing equipment
| Product type: | Intelligent I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 16 |
| Ports: | 1 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail/Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
| CPU Module | |
| CPU | 16-bit CPU (80 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
| Digital Input/Counter | |
| Channels | 16 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | +10 VDC ~ +50 VDC |
| OFF Voltage Level | +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 kΩ |
| Overvoltage Protection | +70 VDC |
| Ethernet | |
| Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 2.1 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση