USB-2255-32 USB I/O Module, 16-ch Isolated DI and 16-ch Sink DO
USB 2.0 I/O module with 16 isolated digital inputs (dry or wet contact) and 16 NPN sink digital outputs, 32-bit counting and a two-port USB hub for daisy-chaining.
- 16 isolated digital inputs, selectable for dry or wet contact via wiring
- 16 open-collector NPN sink digital outputs, up to 600 mA per channel
- All digital inputs can operate as 32-bit counters, rated up to 5 kHz
- Dual watchdog with programmable power-on and safe output values
- Two-port USB 2.0 hub for daisy-chain wiring, up to five nodes
- Plug-and-play operation without a driver, with a lockable USB cable included
240,00 € per piece
| 1–9 pcs | 240,00 € | |
|---|---|---|
| 10–30 pcs | 233,00 € | −3 % |
| 31+ pcs | 228,00 € | −5 % |
Πληροφορίες για το προϊόν "USB-2255-32 USB I/O Module, 16-ch Isolated DI and 16-ch Sink DO"
USB-2255-32 is a USB 2.0 I/O module that adds 16 digital inputs and 16 digital outputs to a PC over a single USB connection. Each input can be wired for dry or wet contact, and every input can also run as a 32-bit counter, which suits pulse and event counting tasks.
The module's two USB ports let several units share one PC port in a daisy chain of up to five nodes, which helps where USB ports are scarce. Power can come from a +10 to +30 VDC terminal block, and the dual watchdog with programmable power-on and safe output values keeps outputs in a defined state. Because the module is plug-and-play, no driver installation is needed.
- Configuration and I/O testing are supported by a setup tool, and an API library with demos is provided for VB, C++, C#.NET, VB.NET and LabVIEW.
- Software support is listed for 32/64-bit Windows 7, 8, 10 and 11, as well as Linux.
- The ordering code includes a 1.8 m lockable USB cable (CA-USB-AC2-L018).
Applications
- Building automation
- Factory automation
- Machine automation
- Measurement and testing
- Testing equipment
| Product type: | USB I/O Module |
|---|---|
| Interface: | USB 2.0 |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Ports: | 2 |
| Isolation: | Isolated |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | 1 Hardware watchdog (1.6 second) 1 Software watchdog (Programmable) |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal 8 kV air for random point |
| LED Indicators | |
| Status | 3 x Power, Run and Error USB-2255-32: 32 x DI and DO USB-2255-64: 64 x DI and DO |
| Digital Input/Counter | |
| Channels | USB-2255-32: 16 USB-2255-64: 32 |
| Type | Dry Contact: Source Wet Contact: Sink/Source |
| ON Voltage Level | Dry Contact: Close to GND Wet Contact: +10 ~ +50 VDC |
| OFF Voltage Level | Dry Contact: Open Wet Contact: +4 VDC Max. |
| Max. Counts | 32-bit |
| Frequency | 5k Hz |
| Input Impedance | 10 KΩ |
| Overvoltage Protection | 70 VDC |
| Digital Output | |
| Channels | USB-2255-32: 16 USB-2255-64: 32 |
| Type | Open Collector, Sink (NPN) |
| Load Voltage | +3.5 ~ +50 VDC |
| Load Current | USB-2255-32: 600 mA/Channel USB-2255-64: 500 mA/Channel |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A ( with short-circuit protection ) |
| Power on Value | Yes, Programmable |
| Safe Value | Yes, Programmable |
| USB | |
| Ports | 2, daisy-chain max. 5 pcs |
| Specification | USB 2.0 HighSpeed (480 Mbps) |
| Connector | Type C |
| Power | |
| Consumption | USB-2255-32: Typical 1.4 W, Max. 1.9 W USB-2255-64: Typical 2.1 W, Max. 3.2 W |
| Powered from Terminal Block | Yes, +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | USB-2255-32: 31 x 166 x 129 USB-2255-64: 56 x 180 x 144 |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση