PROFI-2541 PROFIBUS DP to Multi-mode Fiber Converter, ST-Type
PROFIBUS DP to multi-mode fibre converter with ST connectors for electrically isolated, noise-resistant links of up to 1.4 km between two units.
- PROFIBUS DP support with automatic transmission rate detection up to 3 Mbps
- Transparent data transfer on both the PROFIBUS and fibre sides
- Fibre link of up to 1.4 km (4593 ft) between two units at 850 nm
- Up to 32 stations per segment on the PROFIBUS side
- 3000 VDC isolation on the PROFIBUS side with network isolation protection
- 4 kV ESD protection on any terminal
302,00 € per piece
| 1–9 pcs | 302,00 € | |
|---|---|---|
| 10–30 pcs | 293,00 € | −3 % |
| 31+ pcs | 287,00 € | −5 % |
Πληροφορίες για το προϊόν "PROFI-2541 PROFIBUS DP to Multi-mode Fiber Converter, ST-Type"
PROFI-2541 CR carries PROFIBUS DP traffic over multi-mode fibre optic cable, so engineers can run fieldbus links where copper cabling is exposed to electrical interference, surges, lightning or chemical corrosion. Two units are used as a pair, one at each end of the fibre link.
The converter detects the PROFIBUS transmission rate automatically, up to 3 Mbps, and passes data transparently in both directions. The 850 nm fibre link supports a length of up to 1.4 km (4593 ft) between two units. The PROFIBUS side has 3000 VDC isolation, the unit includes network isolation protection, and every terminal is rated for 4 kV ESD protection.
The unit mounts on a DIN-rail and draws 1 W. Status LEDs for power, TxD and RxD aid commissioning, and the operating temperature range is -25 ~ +75℃. It is certified to CE, UKCA, FCC and WEEE.
Applications
- Industrial automation
- Factory automation
- Process automation
| Product type: | Fiber converter |
|---|---|
| Interface: | Multi-mode fiber (ST) |
| Protocol: | PROFIBUS DP |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| LED Indicators | |
|---|---|
| Status | PWR LED, TxD LED, RxD LED |
| Fiber | |
| Fiber Cable | 62.5 / 125 μm |
| Wavelength | 850 nm |
| PROFIBUS | |
| Transceiver | ADI ADM2486 |
| Baud Rate | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Power | |
| Consumption | 1 W |
| Mechanical | |
| Dimensions (mm) | 33.0 x 126.8 x 104.5 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75℃ |
| Storage Temperature | -30 ~ +85 ℃ |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση