PISO-PS600 PCI 6-Axis Motion Control Card with FRnet Master
DSP-based 6-axis PCI motion control card for pulse command servo and stepper drives, with an FRnet master for up to 128 DI and 128 DO remote channels.
- Independent 6-axis control with pulse command output up to 4 MHz (max.)
- Full-closed and semi-closed loop operation modes
- Linear interpolation on 2 to 6 axes, circular on 2 to 3 axes, helical on 3 axes
- Programmable T/S-curve acceleration and deceleration with on-the-fly speed and position changes
- Encoder input up to 12 MHz (max.) in A/B phase up/down mode
- FRnet master port for up to 128 DI and 128 DO, with 2500 Vrms optical isolation via DN-8368
1.428,00 € per piece
| 1–9 pcs | 1.428,00 € | |
|---|---|---|
| 10–30 pcs | 1.385,00 € | −3 % |
| 31+ pcs | 1.357,00 € | −5 % |
Πληροφορίες για το προϊόν "PISO-PS600 PCI 6-Axis Motion Control Card with FRnet Master"
PISO-PS600 is a PCI motion controller for engineers who need to coordinate up to six axes from a PC. A DSP and FPGA combination handles pulse output, encoder feedback and interpolation on the card, so the host is free to run the application logic. Each axis can run in full-closed or semi-closed loop operation, with incremental or absolute positioning.
The card suits machines that need fast trajectory control, such as X-Y-Z tables, stamping and transfer equipment. Motion profiles use programmable T/S-curve acceleration and deceleration, and speed and position can be changed while a move is in progress. Linear interpolation across two to six axes, circular interpolation across two to three axes and helical interpolation on three axes are all supported.
An onboard FRnet master port extends the digital I/O by up to 128 inputs and 128 outputs over a two-wire link, scanned automatically. Latch inputs, position compare outputs, manual pulse generator and jog functions complete the set of motion I/O on the card.
Applications
- Semiconductor Manufacturing
- Component Inspection
- Manufacturing Quality Control
- Food and Beverage Inspection
- Microscopy and Medical Imaging
- Biometrics Applications
- X-Y-Z Table
- Fix-pitch Stamping Machinery
- Transfer Machinery
- Spinner
- Load/Unload
| Product type: | Motion control card |
|---|---|
| Interface: | PCI |
| Protocol: | FRnet |
| Digital inputs: | 12 local, expandable to 128 |
| Digital outputs: | 3 local, expandable to 128 |
| Isolation: | 2500 Vrms |
| Power input: | +5 V @ 500 mA |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Software | |
|---|---|
| OS Support | Windows 7/10 32/64-bit Windows XP/2000 32-bit |
| Utility | EzGo Utility |
| Hardware | |
| Connector | 68-pin VHDCI and 20-pin SCSI-II |
| General | |
| No. of Axes | 6 |
| Operation Mode | Full-closed Loop Semi-closed Loop |
| Speed Profile | T/S-curve |
| Servo Update Rate | 2 KHz |
| Position Control Mode | Incremental mode and Absolute mode |
| Command Type | Pulse Command |
| Axis I/O | |
| Servo Interface Output | SVON, ALM_RST, ERC |
| Latch Input | High-Speed 5 V or 24 V NPN |
| Mechanical Switch Input | Home, LMT+/-, NHOME, EMG |
| Position Compare Output | High-Speed 5 V TTL or 24 V open collector |
| Servo Interface Input | INP, ALM, RDY |
| Encoder Input | |
| Mode | A/B Phase, Up/Down |
| Ring Counter Mode | 32-bit |
| Counting Rate | 12 MHz (Max.) |
| Counter Width | 32-bit |
| Pulse Output | |
| Mode | CW/CCW, PULSE/DIR |
| Rate | 4 MHz (Max.) |
| Interpolation | |
| Circular | Any 2 to 3 of 6 axes |
| Helical | Any 3 of 6 axes |
| Linear | Any 2 to 6 of 6 axes |
| Digital Input | |
| Channels | Local: 12 DI Expandable: 128 DI |
| Isolation | 2500 Vrms optical isolation (with DN-8368) |
| Digital Output | |
| Channels | Local: 3 DO Expandable: 128 DO |
| Isolation | 2500 Vrms optical isolation (with DN-8368) |
| PC Bus | |
| Type | Universal PCI Bus |
| Power | |
| Consumption | +5 V @ 500 mA |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80 °C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση