PISO-MN200T PCI Dual-line Motionnet Master Card, 20 Mbps Motion/I/O
PCI master card with two Motionnet RS-485 lines for distributed motion and I/O control of up to 128 slave modules, plus 8 parallel inputs and 4 parallel outputs.
- Two Motionnet RS-485 lines at 2.5, 5, 10 or 20 Mbps, software selectable
- Distributed motion control of up to 64 axes and distributed I/O of up to 4096 points
- Up to 128 slave modules connected through the two Motionnet lines
- 8 parallel digital inputs (12-24 V, NPN or PNP) with 3000 Vrms isolation
- 4 parallel digital outputs (NPN or PNP) with 3000 Vrms isolation
- Input change of state and communication error interrupts, with status LEDs
300,00 € per piece
| 1–9 pcs | 300,00 € | |
|---|---|---|
| 10–30 pcs | 291,00 € | −3 % |
| 31+ pcs | 285,00 € | −5 % |
Πληροφορίες για το προϊόν "PISO-MN200T PCI Dual-line Motionnet Master Card, 20 Mbps Motion/I/O"
PISO-MN200T is a 32-bit/33 MHz PCI master card for PC-based machine automation. It drives two Motionnet serial lines, so one card can manage up to 128 slave modules (64 per line), combining distributed motion control with distributed I/O from a single host.
Each Motionnet line runs at 2.5, 5, 10 or 20 Mbps, selected in software. Cable length depends on speed and node count, with a maximum of 100 m at 20 Mbps with 32 slaves and 50 m at 20 Mbps with 64 slaves. On I/O-only duty, one line can exchange signals with 2048 points across 64 local devices within 0.97 msec. On motion duty, it can control up to 64 axes, supporting continuous positioning, zero return and multi-axis interpolation.
The card also provides 8 parallel digital inputs (12-24 V, NPN or PNP) and 4 parallel digital outputs (NPN or PNP) with 3000 Vrms isolation for direct local I/O. The CR ordering code denotes the variant supplied with a terminal block. Software support covers Windows 11 64-bit, Windows 7/10 32/64-bit and Windows XP/2000 32-bit, with VC, VB and BCB development options and the EzGo Utility for set-up and tuning.
Applications
- Machine automation
- Distributed motion control
- Distributed I/O control
- Multi-axis positioning and interpolation
| Product type: | PCI master card |
|---|---|
| Interface: | Motionnet (RS-485), PCI |
| Protocol: | Motionnet |
| Digital inputs: | 8 |
| Digital outputs: | 4 |
| Ports: | 2 Motionnet lines |
| Isolation: | 3000 Vrms |
| Power input: | +5 V @ 500 mA |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Software | |
|---|---|
| OS Support | Windows 11 64-bit Windows 7/10 32/64-bit Windows XP/2000 32-bit |
| Development | VC/VB/BCB |
| Utility | EzGo Utility |
| Hardware | |
| Connector | HD D-Sub 15-pin x 1 |
| LED Indicators | |
| Status | Connection (green) Communication Error (red) |
| General | |
| Interrupts | Input Change of State, Communication Error |
| Digital Input | |
| Channels | 8 |
| Type | 12-24 V, NPN or PNP |
| Isolation | 3000 Vrms |
| Input Impedance | 4.7 KΩ |
| Digital Output | |
| Channels | 4 |
| Type | NPN or PNP |
| Isolation | 3000 Vrms |
| PC Bus | |
| Type | 32-bit/33 MHz universal PCI-Bus |
| Motionnet | |
| Communication Connectors | 5-pin terminal block |
| Transfer Speed | 2.5, 5, 10, 20 Mbps (Software controlled) |
| Length | Max. 100 M (20 Mbps; 32 Slave modules) Max. 50 M (20 Mbps; 64 Slave modules) Max. 100 M (10 Mbps; 64 Slave modules) |
| Protocol | Motionnet (Half-duplex RS-485) |
| Power | |
| Consumption | +5 V @ 500 mA |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση