I-9120 Programmable CAN Module, 1-port CAN 2.0A/2.0B, Parallel Bus
Standalone 1-port CAN controller for the 9000 series PAC, supporting CAN 2.0A/2.0B at 10 kbps to 1 Mbps with user-programmable firmware.
- One CAN port on a 5-pin screw terminal connector
- CAN 2.0A and 2.0B to ISO-11898-2, 10 kbps to 1 Mbps baud rate
- NXP SJA1000T CAN controller with 16 MHz clock
- User-programmable firmware running on an 80186 CPU at 80 MHz
- Supports WP-9000-CE7, XP-9000-WES7, LP-9000, LX-9000 and (A)XP-9000-IoT controllers
- Re-transmission, bus arbitration and error detection
300,00 € per piece
| 1–9 pcs | 300,00 € | |
|---|---|---|
| 10–30 pcs | 291,00 € | −3 % |
| 31+ pcs | 285,00 € | −5 % |
Πληροφορίες για το προϊόν "I-9120 Programmable CAN Module, 1-port CAN 2.0A/2.0B, Parallel Bus"
I-9120 CR adds a single isolated CAN port to 9000 series programmable automation controllers. Its NXP SJA1000T controller handles CAN 2.0A and 2.0B frames at baud rates from 10 kbps to 1 Mbps, making it suited to distributed real-time control where engineers need a cost-effective CAN interface.
The on-board 80186 CPU runs user-defined firmware, so the module can act as a programmable CAN node or device server. It can also exchange data with RS-232, RS-485 and Ethernet interfaces, allowing applications to bridge different communication protocols.
The CAN port uses a 5-pin screw terminal connector and includes a switchable 120 Ω terminal resistor. Isolation is rated at 3000 VDC for DC-to-DC and 2500 Vrms for the photo-coupler, and the module operates from -25 ~ +75 °C.
Applications
- Energy Storage System
| Product type: | CAN module |
|---|---|
| Interface: | CAN |
| Protocol: | CAN 2.0A/2.0B |
| Ports: | 1 |
| Isolation: | 3000 VDC (DC-to-DC), 2500 Vrms (photo-coupler) |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| Software | |
|---|---|
| Driver | WP-9000-CE7、XP-9000-WES7、LP-9000、LX-9000 |
| SDK | VC6, VC++ 2005, C#.net 2005, VB.net 2005, Linux |
| CPU Module | |
| CPU | 80186, 80 MHz or compatible |
| EEPROM | 16 KB |
| Flash | 512 KB |
| SRAM | 512 KB |
| Watchdog Timer | Watchdog IC |
| LED Indicators | |
| Status | 1 x Power 1 x CAN status 1 x Operating mode |
| CAN | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Power | |
| Consumption | 1.5 W |
| Mechanical | |
| Dimensions (mm) | 31 x 91 x 115 (W x L x H) |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση