F-8028CV 8-ch Isolated Analogue Output Redundant Module
8-channel, 16-bit isolated analogue output module with redundancy for iDCS-8000 systems. Offers 3000 VDC isolation and redundant switching in under 1 ms.
- 8 isolated current and voltage output channels with 16-bit resolution
- Programmable output ranges, including 0 ~ 20 mA, 4 ~ 20 mA, ±5 V and ±10 V
- Redundancy with fast redundant switching time of less than 1 ms
- Short circuit protection and open wire detection (4 ~ 20 mA)
- Overrange output capability
- 3000 VDC isolation from output to backplane and from output to frame ground
489,00 € per piece
| 1–9 pcs | 489,00 € | |
|---|---|---|
| 10–30 pcs | 474,00 € | −3 % |
| 31+ pcs | 465,00 € | −5 % |
Πληροφορίες για το προϊόν "F-8028CV 8-ch Isolated Analogue Output Redundant Module"
F-8028CV CR is an 8-channel analogue output module for the iDCS-8000 system, built to drive current and voltage signals from a controller. Each channel converts 16-bit digital data from the system module into an output signal, with the output range programmable per channel. Start-up (power-on) and safe values are set through the configuration software, so outputs can be placed in a defined state.
The module suits applications where output accuracy and fault containment matter. It specifies ±0.05% FSR accuracy and provides 3000 VDC isolation between the outputs and the backplane bus, and between the outputs and frame ground. A fault on one channel, such as a high voltage or current event, is isolated so that it does not affect other components in the system.
Redundancy is supported, with a redundant switching time of less than 1 ms. Protection and diagnostics include short circuit protection, open wire detection on the 4 ~ 20 mA range and overrange output. The module operates from -25 °C to +75 °C with 5 to 95% RH, non-condensing.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Analog output module |
|---|---|
| Analog outputs: | 8 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Yes |
| ESD (IEC 61000-4-2) | Yes |
| LED Indicators | |
| Status | 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status) |
| Analog Output | |
| Channels | 8 |
| Type | 0 ~ 20 mA, 4 ~ 20 mA (current sourcing) 0 ~ 5 V, ±5 V, 0 ~ 5 V, ±10 V |
| Range | 0 ~ 20 mA: +20% (0 ~ 24 mA) 4 ~ 20 mA: ±25% (0 ~ 24 mA) 0 ~ 5 V: +20% (0 ~ 6 V) ±5 V: ±20% (±6V) 0 ~ 5 V: +20% (0 ~ 12 V) ±10 V: ±20% (±12V) |
| Resolution | 16 bit |
| Accuracy | ±0.05% FSR |
| Zero Drift | ±0.2 μV/℃ |
| Span Drift | ±25 ppm/℃ |
| Short Circuit Protection | Yes |
| Response Time | <200 μS |
| Open Wire Detection | Yes (4 ~ 20 mA) |
| Voltage Output Capability | 500 Ω |
| Current Load Resistance | 750 Ω |
| Power-on Value | Yes |
| Safe Value | Yes |
| Isolation | 3000 VDC |
| I/O Expansion | |
| I/O Type | DN-AIO-M |
| Power | |
| Consumption | 1 W |
| Mechanical | |
| Dimensions (mm) | 30 x 85 x 115 |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση