PEX-DA16 PCI Express 16-ch 14-bit Analog Output Board
PCI Express x1 analog output board with 16 channels of 14-bit output, each channel individually set to ±10 V voltage or 0 ~ 20 mA current. Supplied with a CA-4002 D-Sub connector.
- 16 analogue output channels at 14-bit resolution, each individually selectable as ±10 V voltage or 0 ~ 20 mA current (sink)
- Software calibration with no jumpers or trim-pots, with calibration data saved in EEPROM
- 4-bit Card ID switch for identifying individual boards when two or more cards are installed
- 16-channel 5 V/TTL digital input and 16-channel 5 V/TTL digital output
- Pull-high/pull-low jumpers for the digital input channels
- Double-buffered DA latch with static update operation
610,00 € per piece
| 1–9 pcs | 610,00 € | |
|---|---|---|
| 10–30 pcs | 592,00 € | −3 % |
| 31+ pcs | 580,00 € | −5 % |
Informace o výrobku "PEX-DA16 PCI Express 16-ch 14-bit Analog Output Board"
The PEX-DA16 CR is a 16-channel, 14-bit analogue output card for PCI Express slots, suited to engineers who need many control outputs in a single host PC. Each channel can be configured on its own as either a voltage output (±10 V) or a current output (0 ~ 20 mA, sink), so mixed signal types can share one board.
Calibration is handled in software, so no jumpers or trim-pots need adjusting. The calibration data is stored in EEPROM for long-term use. A 4-bit Card ID switch lets the software identify individual boards when two or more cards are installed in the same computer. The card is also described as a drop-in replacement for the PIO-DA series, without changes to existing software or drivers.
The board adds 16 channels of 5 V/TTL digital input and 16 channels of 5 V/TTL digital output, with pull-high and pull-low jumpers for the DI channels. Analogue outputs use double-buffered DA latching and static update mode. The card is CE, UKCA, FCC, RoHS and WEEE certified and ships with one CA-4002 D-Sub connector.
Applications
- High speed data acquisition system
- Process monitor and control
- Vibration analysis
- Digital pattern generator from digital I/O port
| Product type: | DAQ board |
|---|---|
| Interface: | PCI Express x1 |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Analog outputs: | 16 |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Card ID | Yes (4-bit) |
| Analog Output | |
| Channels | PEX-DA4 : 4 PEX-DA8 : 8 PEX-DA16 : 16 |
| Range | Voltage: ± 10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ± 2 LSB @ 25 °C, ± 10 V |
| Response Time | 166 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 500 kHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/CMOS |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.1 V Max. Logic 1: 4.4 V Min. |
| Load Current | Sink: 6 mA @ 0.33 V Source: 6 mA @ 4.77 V |
| Response Speed | 500 kHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | PCI Express x 1 |
| Data Bus | 8-bit |
| Power | |
| Consumption | PEX-DA4 : 750 mA@ +3.3 V, 350 mA@ +12 V PEX-DA8 : 750 mA@ +3.3 V, 400 mA@ +12 V PEX-DA16 : 750 mA@ +3.3 V, 550 mA@ +12 V |
| Mechanical | |
| Dimensions (mm) | 116.4 x 172.6 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Přihlásit