F-8028CH Redundant 8-ch Isolated Current Output Module with HART Master
8-channel isolated 4 ~ 20 mA analog output module with a built-in HART master and redundancy, designed for the iDCS-8000 system.
- 8 current output channels, 4 ~ 20 mA, current sourcing
- Built-in HART master interface for remote device maintenance
- Redundancy with fast switching time (<1 ms)
- 3000 VDC isolation from output to backplane and from output to frame ground
- 16-bit resolution with ±0.05% FSR accuracy
- Configurable power-on and safe output values
544,00 € per piece
| 1–9 pcs | 544,00 € | |
|---|---|---|
| 10–30 pcs | 527,00 € | −3 % |
| 31+ pcs | 516,00 € | −5 % |
Informace o výrobku "F-8028CH Redundant 8-ch Isolated Current Output Module with HART Master"
F-8028CH CR is a 16-bit, 8-channel analog output module for the iDCS-8000 system. A digital-to-analogue converter driven by the system module turns control data into current signals on each channel, with start-up and safe values set through the configuration software.
The module suits applications that need accurate outputs and remote device maintenance. Accuracy is specified at ±0.05% FSR, and a built-in HART master lets engineers reach HART-enabled field devices remotely. Each channel is isolated at 3000 VDC from the backplane bus and from frame ground, so a fault on one output channel should not affect other components in the system.
Redundancy is supported, with a redundant switching time below 1 ms. Open wire detection and overrange output help with diagnostics, and the operating temperature range is -25 ~ +75 °C.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Analog output module |
|---|---|
| Protocol: | HART |
| Analog outputs: | 8 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75 °C |
Specifications
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | Yes |
| ESD (IEC 61000-4-2) | Yes |
| LED Indicators | |
| Status | 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status) |
| Analog Output | |
| Channels | 8 |
| Type | 4 ~ 20 mA, currnet sourcing |
| Range | ±25% (0 ~ 24 mA) |
| Resolution | 16 bit |
| Accuracy | ±0.05% FSR |
| Zero Drift | ±0.2 μV/℃ |
| Span Drift | ±25 ppm/℃ |
| Response Time | <200 μS |
| Open Wire Detection | Yes |
| Voltage Output Capability | 0 ~ 750 Ω |
| Power-on Value | Yes |
| Safe Value | Yes |
| Isolation | 3000 VDC |
| I/O Expansion | |
| I/O Type | DN-AIO-M |
| Power | |
| Consumption | 0.5 W + 10W |
| Mechanical | |
| Dimensions (mm) | 30 x 85 x 115 |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Přihlásit