ECAT-2515 EtherCAT Junction SubDevice Module, 6-Port
EtherCAT junction SubDevice module with six RJ-45 ports (1 IN, 5 OUT) for branch wiring of EtherCAT networks, rated for up to 100 m between stations (100BASE-TX).
- Six RJ-45 ports: 1 IN and 5 OUT for branch or daisy-chain wiring
- Supports daisy chain and star connection
- Up to 100 m between stations (100BASE-TX)
- EtherCAT conformance test tool verified
- 4 kV contact ESD protection on each port
- Reverse polarity protection with +10 ~ +30 VDC input range
216,00 € per piece
| 1–9 pcs | 216,00 € | |
|---|---|---|
| 10–30 pcs | 210,00 € | −3 % |
| 31+ pcs | 206,00 € | −5 % |
Informace o výrobku "ECAT-2515 EtherCAT Junction SubDevice Module, 6-Port"
ECAT-2515 CR is a 6-port EtherCAT junction SubDevice module that lets you build branch topologies from a single EtherCAT segment. Its one IN port connects to the upstream network, and its five OUT ports feed separate branches, so you can replace long daisy chains with a more manageable layout.
Sectioned wiring makes commissioning and fault finding easier. If a SubDevice fails or a cable is disconnected, only the devices in the same section are affected, and the remaining sections can continue to communicate with the Main Device controller. Each section can then be debugged on its own, which shortens troubleshooting time.
The module supports daisy chain and star connection, with up to 100 m between stations over 100BASE-TX. It is EtherCAT conformance test tool verified, has 4 kV contact ESD protection on each port, and mounts on a DIN rail in a plastic housing with reverse polarity protection on its +10 ~ +30 VDC supply.
Applications
- Converting daisy-chain wiring into branch topology
- Sectioned wiring so that a fault affects only one section during debugging
- Ring-based cable redundancy, as described for EtherCAT junction modules
| Product type: | EtherCAT junction |
|---|---|
| Interface: | RJ-45 |
| Protocol: | EtherCAT |
| Ports: | 6 |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| EtherCAT | |
|---|---|
| Ports | 6 x RJ-45 (1 IN; 5-OUT) |
| No. of Nodes | 4 |
| Distance Between Stations | Max. 100 m (100BASE-TX) |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | 0.06 A @ 24 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 90 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ + 75 °C |
| Storage Temperature | -30 ~ + 80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Přihlásit