ET-2242U Ethernet I/O Module, 16-ch Digital Output with 2-port Switch
16-channel sink/source digital output module with a built-in 2-port Ethernet switch for daisy-chain wiring, supporting Modbus TCP, MQTT and SNMP V2c.
- 16 digital output channels, selectable as sink or source by wiring, 500 mA per channel
- Built-in 2-port 10/100 Base-Tx switch with LAN bypass for daisy-chain wiring
- Modbus TCP/UDP, MQTT and SNMP V2c protocol support
- 3000 VDC I/O isolation with EFT, ESD and surge protection
- Programmable power-on and safe values for each digital output
- I/O Pair Connection (Push and Pull) between remote DI and local DO
204,00 € per piece
| 1–9 pcs | 204,00 € | |
|---|---|---|
| 10–30 pcs | 198,00 € | −3 % |
| 31+ pcs | 194,00 € | −5 % |
Информация за продукта "ET-2242U Ethernet I/O Module, 16-ch Digital Output with 2-port Switch"
The ET-2242U is an Ethernet-connected digital output module with 16 channels that can be wired as either sink-type or source-type. Each channel switches a load of up to 500 mA, which makes it suitable for driving field actuators directly from a remote I/O point on an Ethernet network.
A built-in 2-port 10/100 Base-Tx switch with LAN bypass allows modules to be daisy-chained along a single cable run, reducing switch hardware and cabling in the panel. The module also supports I/O Pair Connection, which maps remote DI data to local DO channels via Modbus TCP in Pull mode, and it can act as an MQTT publisher and subscriber or report I/O and module status over SNMP V2c.
Programmable power-on and safe output values, dual watchdog protection, and 3000 VDC I/O isolation with EFT, ESD and surge protection help the module hold a defined state and tolerate electrically noisy industrial environments. Configuration is handled through the built-in web server.
Applications
- Factory Automation
- Machine Automation
- Building Automation
- Remote Diagnosis & Maintenance
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP, MQTT, SNMP v2c |
| Digital outputs: | 16 |
| Ports: | 2 |
| Isolation: | 3000 VDC (I/O) |
| Power input: | +10 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit ARM |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±8 kV Contact for Each Terminal ±16 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet, I/O |
| Digital Output | |
| Channels | 16 |
| Type | Push-Pull |
| Sink/Source (NPN/PNP) | Sink/Source |
| Load Voltage | +3.5 ~ +80 V |
| Load Current | 500 mA/channel |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-Tx, Switch Ports |
| LAN bypass | Yes |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.6 W (max.) |
| Powered from Terminal Block | +10 ~ +48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 33 x 126 x 108 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход