PIO-DA8U Universal PCI 8-ch 14-bit Analog Output Board
PIO-DA8U CR universal PCI analogue output board with 8 channels of 14-bit voltage (±10 V) or current (0 ~ 20 mA) output, plus 16-channel 5 V/TTL digital input and output.
- Eight 14-bit analogue output channels, each selectable as ±10 V voltage or 0 ~ 20 mA current output
- Software calibration with calibration data saved in EEPROM, no jumpers or trim-pots required
- 16-channel 5 V/TTL digital input with pull-high and pull-low function
- 16-channel 5 V/TTL digital output with static update operation
- Two timer-triggered interrupt sources and double-buffered DA latch
- 3 x 16-bit timer/counter channels with 4 MHz internal reference clock
460,00 € per piece
| 1–9 pcs | 460,00 € | |
|---|---|---|
| 10–30 pcs | 446,00 € | −3 % |
| 31+ pcs | 437,00 € | −5 % |
Информация за продукта "PIO-DA8U Universal PCI 8-ch 14-bit Analog Output Board"
PIO-DA8U CR is a universal PCI card that provides eight 14-bit analogue outputs for engineers who need precise control signals inside a PC-based data acquisition system. Each channel can be configured individually as either a voltage output (±10 V) or a current output (0 ~ 20 mA), so one board can serve mixed signal types.
Calibration is handled in software rather than with jumpers or trim-pots, and the calibration data can be stored in EEPROM. The card also carries 16 channels of 5 V/TTL digital input with pull-high and pull-low options, and 16 channels of 5 V/TTL digital output, with a 4-bit Card ID switch to identify the board when two or more are installed in the same computer.
The board is supplied with one CA-4002 D-Sub connector. It is rated for 0 ~ +60°C operation and -20 ~ +70°C storage, and carries CE, UKCA, FCC, RoHS and WEEE certifications.
Applications
- High speed data acquisition system
- Process monitoring and control
- Vibration analysis
- Digital pattern generation from digital I/O port
| Product type: | DAQ board |
|---|---|
| Interface: | Universal PCI |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Power input: | 800 mA @ +5 V |
| Operating temperature: | 0 ~ +60°C |
| Mounting: | PCI slot |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Card ID | Yes(4-bit) for Version 1.1 or above |
| Analog Output | |
| Channels | PIO-DA4U : 4 PIO-DA8U : 8 PIO-DA16U : 16 |
| Range | Voltage: ±10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ±2 LSB @ 25 °C, ± 10 V |
| Response Time | 333 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.71 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit |
| Power | |
| Consumption | PIO-DA4U : 600 mA@ +5 V PIO-DA8U : 800 mA@ +5 V PIO-DA16U : 1400 maA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 105.1 x 188 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход