I-7016P 6-wire Strain Gauge Input Module, DCON, RS-485
DIN-rail RS-485 strain gauge input module with 16-bit resolution, 6-wire sensing for long cable runs, linear mapping for weighing, and 1 digital input and 4 digital outputs.
- 6-wire strain gauge input with sense wires for cable voltage-drop compensation
- 16-bit resolution with ±0.05% of FSR accuracy
- Linear mapping function for converting readings to weight using user-defined tables
- 0 ~ +10 V excitation voltage output, up to 40 mA
- 1 digital input configurable as general input or 50 Hz event counter
- 4 open-collector digital outputs with programmable power-on and safe values
283,00 € per piece
| 1–9 pcs | 283,00 € | |
|---|---|---|
| 10–30 pcs | 274,00 € | −3 % |
| 31+ pcs | 269,00 € | −5 % |
Информация за продукта "I-7016P 6-wire Strain Gauge Input Module, DCON, RS-485"
The I-7016P CR converts signals from full-bridge strain gauges and load cells into measurements on an RS-485 DCON network. Its 6-wire connection adds two sense wires that measure the excitation voltage at the sensor, so the module can detect and compensate for voltage drop along the cable. This makes it a suitable choice where the sensor sits more than 10 metres from the controller.
Beyond raw acquisition, the module supports user-defined linear mapping tables, which convert the measured value directly into weight. It also provides a 0 to +10 V excitation output, one digital input that can be used as a general input or a 50 Hz event counter, and four open-collector digital outputs that can be set to general use or high/low alarm functions.
This variant is the blue-cover version without a local LED display. Choose the I-7016PD if an on-board display is required, or the 4-wire I-7016 series for shorter runs where cable compensation is not needed.
Applications
- Force measurement with strain gauges and load cells
- Weighing systems using linear mapping tables
- Long-distance strain gauge measurement
- High-precision measurement in industrial environments
- Alarm signalling via high/low digital outputs
| Product type: | Strain gauge input module |
|---|---|
| Interface: | RS-485 |
| Protocol: | DCON |
| Digital inputs: | 1 |
| Digital outputs: | 4 |
| Analog inputs: | 1 |
| Analog outputs: | 1 |
| Ports: | 1 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Module, Communication (Programmable) |
| Display | |
| Type | 5-Digit 7 Segment LED Display (Only for I-7016D, I-7016PD) |
| Isolation | |
| Intra-module Isolation | I-7016(D): 1500 VDC I-7016P(D): 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | 1 x Power and Communication |
| Digital Input/Counter | |
| Channels | 1 |
| Type | Dry Contact |
| Sink/Source (NPN/PNP) | Source |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Max. Counts | 65535 (16-bit) |
| Frequency | 50 Hz |
| Input Impedance | 3 kΩ |
| Overvoltage Protection | ±30 VDC |
| Digital Output | |
| Channels | 4 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +3.5 ~ +50 VDC |
| Load Current | 30 mA/channel |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Strain Gauge, Load Cell Input | |
| Channels | I-7016(D): 2 I-7016P(D): 1 |
| Type | Full-Bridge Strain Gauge Voltage Current |
| Range | Voltage: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, and ±2.5 V Current: ±20 mA |
| Wiring | I-7016(D): 4-wire I-7016P(D): 6-wire |
| Accuracy | ±0.05% of FSR |
| Resolution | 16-bit |
| Sampling Rate | I-7016(D): 1-ch Mode: 10 Hz 2-ch Mode: 2 Hz (total) I-7016P(D): 10 Hz |
| Impedance | 20 MΩ |
| Long Distance Measurement | Yes, only for I-7016P(D) |
| Overvoltage Protection | ±5 VDC |
| Excitation Voltage Output | |
| Channels | 1 |
| Range | 0 ~ +10 V |
| Resolution | 16-bit |
| Accuracy | ±0.05% of FSR |
| Max. Load Current | 40 mA |
| Power on Value | Programmable |
| COM Ports | |
| Ports | 1 x RS-485 |
| Baud Rate | 1200 ~ 115200 bps |
| Data Format | (N, 8, 1) |
| Protocol | DCON |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +10 ~ +30 VDC |
| Consumption | I-7016: 2.4 W I-7016D: 3.0 W I-7016P(D): 1.3 W |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Вход